Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Square 60 mm axial case fan, black frame, three-wire 3-pin connector

Fans

Fans Delta 6025 60x60x25mm 24V 0.21A 3.6W 30dBA 45CFM case fan

SKU CH-BT7P-RVY6F

A 60 mm two-ball-bearing axial fan moves 45 CFM at 30 dBA while drawing 0.21 A from a 24 V three-pin header

  • 45 CFM airflow moves heat fast from tight cases
  • 30 dBA noise level keeps the system quiet
  • Two ball bearing design rated for 100000 hours of operation
  • 24 V 0.21 A 3.6 W power draw suits low-voltage builds
  • 60 x 60 x 25 mm frame fits standard 6025 mounting points

60 mm 24 V axial case fan

This 60 x 60 x 25 mm fan runs on 24 V and draws 0.21 A for 3.6 W of power. Two ball bearings and a 100 000 hour rated life suit continuous duty in industrial or PC chassis cooling. The three pin power interface supplies voltage only with no speed signal. Airflow reaches 45 CFM at a stated 30 dBA noise level.

Three pin plug installs in seconds

The 3 PIN connector fits standard motherboard or controller headers without adapters. No RPM control wire is present so the fan runs at full speed whenever powered. Polarity follows the usual ground, 24 V, sense order; reversing the plug will prevent operation. Clearance of 25 mm depth is required behind the mounting surface.

Fixed speed limits thermal tuning

Without PWM or voltage regulation the airflow and noise stay constant regardless of load. Builders who need variable speed or software fan curves cannot use this model. The 45 CFM rating is the single operating point; higher static pressure or lower acoustic targets need a different fan. The 24 V supply rail must be available in the system.

Přednosti

  • 45 CFM airflow moves heat fast from tight cases
  • 30 dBA noise level keeps the system quiet
  • Two ball bearing design rated for 100000 hours of operation
  • 24 V 0.21 A 3.6 W power draw suits low-voltage builds
  • 60 x 60 x 25 mm frame fits standard 6025 mounting points

Specifikace

Pro tento produkt zatím nejsou zveřejněny žádné specifikace.

Otázky k tomuto produktu

How do I verify the fan is running correctly after installation?

Listen for steady airflow and confirm the 30 dBA noise level; the two ball bearing design rated for 100000 hrs should spin smoothly without vibration or rattle.

What comes in the box and what must I source separately?

The fan unit with 3-pin power connector is included; mounting screws and any PWM controller or adapter cables are not supplied and must be purchased separately.

Which Delta 6025 variant should I pick for a 24 V system needing 45 CFM?

Choose the QFR0624GH model with 24 V, 0.21 A, 3.6 W, 30 dBA and 45 CFM — it matches those exact specifications.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.