BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
G.SKILL
Dual-channel DDR3 kit delivering 16 GB at 2133 MT/s with CL11 11-13-13-31 timings and 1.50 V XMP profiles for LGA1150 and LGA1155 platforms
The G.SKILL Ares Series F3-2133C11D-16GAR is a 16 GB dual-channel kit built from two 8 GB unbuffered DDR3 modules. Rated at 2133 MHz with timings of 11-13-13-31 and a CAS latency of 11, the kit runs at 1.50 V and includes Intel XMP profiles for second, third and fourth generation Core processors on LGA1155 and LGA1150 platforms. A low-profile red heat spreader stands 3.2 cm tall and carries green LEDs.
Builders upgrading or repairing LGA1155 or LGA1150 systems that support DDR3 2133 will find the rated speed and XMP support straightforward to enable. The low-profile height clears large CPU coolers and fits small-form-factor cases. Systems requiring ECC, registered modules, or a different DDR generation should select a different kit.
The single specification that decides fitment is the DDR3 2133 rating at 1.50 V. Only motherboards and CPUs that officially support DDR3 at this voltage and data rate can run the kit at its rated 17.0 GB/s per channel without manual timing adjustments.
| Brand | G.SKILL |
|---|---|
| Series | Ares Series |
| Model | F3-2133C11D-16GAR |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 2133 (PC3 17000) |
| CAS Latency | CL11 |
| Timing | 11-13-13-31 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Red |
| Heat Spreader | Yes |
| Features | Compatible with Intel LGA1155 and LGA1150 platforms Intel XMP support for 2nd,3rd and 4th Generation Intel Core Processors To reach rated memory speed, enabling Intel XMP profile or manual BIOS tuning is required Combination with other memory kits or modules (even with same model number) is not recommended to avoid any compatibility issues |
| LED Color | Green |
| Sendingarþyngd | 0.11 kg |
| Stærð sendingar | 204 × 138 × 17 mm |
The low-profile spreader is only 3.2 cm tall, leaving ample clearance for most large air coolers and small-form-factor cases.
The motherboard will run all populated slots at the speed and timings of the slowest installed kit, so your existing modules will dictate the final frequency.
Enable the Intel XMP profile in BIOS, then verify the active frequency and timings with CPU-Z or the motherboard’s built-in memory-info screen.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Ekkert tungumál fannst.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?