Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Blue PVC soft tube roll 400 cm 10/13 mm

greenDracaena

greenDracaena D-PVC-2-F soft tube 400 cm 10/13 mm Blue

SKU CH-M6HG-37D03

Blue PVC tubing supplied as a 400 cm roll with 10 mm inner and 13 mm outer diameter for custom water cooling loops

  • Block MaterialPvc
  • Radiator Size1/2" OD (Soft Tube)
  • Radiator MaterialPvc
  • Fan Size1/2" OD (Soft Tube)
  • Fan Dim.20.0 in x 20.0 in x 0.1 in
  • ColorBlue
  • Lightweight PVC construction reduces loop weight while resisting abrasion
  • Continuous 400 cm roll lets you cut exact lengths without connectors
  • Standard 10 mm inner and 13 mm outer diameter fits common fittings
  • Blue colour option coordinates with themed builds
  • Flexible material enables tool-free cutting and smooth installation

400 cm PVC Soft Tube 10/13 mm Blue

This greenDracaena soft tube is a continuous 400 cm roll of PVC tubing with a 10 mm inner diameter and 13 mm outer diameter. The blue colour lets builders match or contrast their coolant loop. It is intended for custom water cooling systems where flexible, abrasion-resistant runs are needed.

Replaces Pre-Cut Soft Tube Lengths

Instead of fixed-length pieces, this single roll lets you cut every run to the exact length required, removing the need for multiple pre-cut sections and reducing waste. The jump is worth it when a build has non-standard routing or when you want to keep spare tubing for future loop changes.

Fits Standard 10/13 mm Fittings

The tube works with common G1/4 threaded compression or barb fittings sized for 10 mm ID and 13 mm OD. Its flexibility eases tight bends without kinking, freeing up routing options in compact cases. No special cutting tools are required beyond a sharp blade.

Helstu kostir

  • Lightweight PVC construction reduces loop weight while resisting abrasion
  • Continuous 400 cm roll lets you cut exact lengths without connectors
  • Standard 10 mm inner and 13 mm outer diameter fits common fittings
  • Blue colour option coordinates with themed builds
  • Flexible material enables tool-free cutting and smooth installation

Tæknilýsing

BrandgreenDracaena
SeriesBlue
ModelD-PVC
Part NumberD-PVC-2-F
Block MaterialPvc
Radiator Size1/2" OD (Soft Tube)
Radiator MaterialPvc
Fan Size1/2" OD (Soft Tube)
Fan Dim.20.0 in x 20.0 in x 0.1 in
ColorBlue
LED ColorBlue
Tube MaterialPvc
Package Contentspipe

Spurningar um þessa vöru

Will the 10 mm inner diameter and 13 mm outer diameter tubing fit standard G1/4 compression fittings?

Yes, the 10 mm ID and 13 mm OD match common soft-tube sizing for G1/4 fittings; push the tube fully onto the barb and tighten the collar to seal.

How do I cut the 400 cm roll to length without kinking the PVC?

Measure the run, mark the tube, and cut squarely with a sharp tubing cutter or fine-tooth saw; deburr the end before inserting it into the fitting.

When should the blue PVC tubing be replaced in a running loop?

Inspect annually for clouding, surface stickiness, or reduced flexibility; replace the tube if any of those signs appear to maintain flow and seal integrity.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.