Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

greenDracaena

greenDracaena D-PVC-2-F soft tube 400 cm 10/13 mm Blue

SKU CH-M6HG-37D03

Blue PVC tubing supplied as a 400 cm roll with 10 mm inner and 13 mm outer diameter for custom water cooling loops

  • Block MaterialPvc
  • Radiator Size1/2" OD (Soft Tube)
  • Radiator MaterialPvc
  • Fan Size1/2" OD (Soft Tube)
  • Fan Dim.20.0 in x 20.0 in x 0.1 in
  • ColorBlue
  • Lightweight PVC construction reduces loop weight while resisting abrasion
  • Continuous 400 cm roll lets you cut exact lengths without connectors
  • Standard 10 mm inner and 13 mm outer diameter fits common fittings
  • Blue colour option coordinates with themed builds
  • Flexible material enables tool-free cutting and smooth installation

400 cm PVC Soft Tube 10/13 mm Blue

This greenDracaena soft tube is a continuous 400 cm roll of PVC tubing with a 10 mm inner diameter and 13 mm outer diameter. The blue colour lets builders match or contrast their coolant loop. It is intended for custom water cooling systems where flexible, abrasion-resistant runs are needed.

Replaces Pre-Cut Soft Tube Lengths

Instead of fixed-length pieces, this single roll lets you cut every run to the exact length required, removing the need for multiple pre-cut sections and reducing waste. The jump is worth it when a build has non-standard routing or when you want to keep spare tubing for future loop changes.

Fits Standard 10/13 mm Fittings

The tube works with common G1/4 threaded compression or barb fittings sized for 10 mm ID and 13 mm OD. Its flexibility eases tight bends without kinking, freeing up routing options in compact cases. No special cutting tools are required beyond a sharp blade.

Puncte forte

  • Lightweight PVC construction reduces loop weight while resisting abrasion
  • Continuous 400 cm roll lets you cut exact lengths without connectors
  • Standard 10 mm inner and 13 mm outer diameter fits common fittings
  • Blue colour option coordinates with themed builds
  • Flexible material enables tool-free cutting and smooth installation

Specificații

BrandgreenDracaena
SeriesBlue
ModelD-PVC
Part NumberD-PVC-2-F
Block MaterialPvc
Radiator Size1/2" OD (Soft Tube)
Radiator MaterialPvc
Fan Size1/2" OD (Soft Tube)
Fan Dim.20.0 in x 20.0 in x 0.1 in
ColorBlue
LED ColorBlue
Tube MaterialPvc
Package Contentspipe

Întrebări despre acest articol

Will the 10 mm inner diameter and 13 mm outer diameter tubing fit standard G1/4 compression fittings?

Yes, the 10 mm ID and 13 mm OD match common soft-tube sizing for G1/4 fittings; push the tube fully onto the barb and tighten the collar to seal.

How do I cut the 400 cm roll to length without kinking the PVC?

Measure the run, mark the tube, and cut squarely with a sharp tubing cutter or fine-tooth saw; deburr the end before inserting it into the fitting.

When should the blue PVC tubing be replaced in a running loop?

Inspect annually for clouding, surface stickiness, or reduced flexibility; replace the tube if any of those signs appear to maintain flow and seal integrity.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.