Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Low-profile PCIe card with two M.2 slots

HighPoint Technologies, Inc.

HighPoint Technologies, Inc. SSD7202 RAID controller

SKU CH-FR3Y-FGVNH MPN SSD7202

Low-profile RAID card adds two dedicated M.2 NVMe ports with RAID 0/1 support for compact servers

  • Form FactorLow Profile
  • External Connectors2 x M.2 NVMe port (Dedicated PCIe 3.0 x4 per port)
  • InterfacePCI-Express 3.0 x16
  • RAIDRAID 0/1
  • Operating Systems SupportedWindows 10 Windows Server 2016 or later Linux Kernel 3.3 or
  • Dimensions6.29" x 4.76" x 0.85"
  • Bootable NVMe RAID for Windows and Linux
  • Dedicated PCIe 3.0 x4 bandwidth per M.2 SSD
  • Low-profile form factor fits 1U and 2U servers
  • Hardware RAID 0 and 1 with off-the-shelf M.2 drives
  • PCIe 3.0 x16 interface works in x8 and x16 slots

Low-Profile RAID Controller

The HighPoint SSD7202 is a PCIe 3.0 x16 RAID controller that adds two dedicated M.2 NVMe ports to low-profile servers or workstations. It supports RAID 0 and RAID 1 for bootable or data volumes across off-the-shelf MLC, TLC or QLC SSDs.

Sustained Load Behaviour

Each M.2 port receives a dedicated PCIe 3.0 x4 link while the card uses a PCIe 3.0 x8 bus to the host. This architecture avoids internal bottlenecks when both drives operate at full speed for extended periods.

Compatibility Check

Verify that your chassis accepts a 6.29 inch by 4.76 inch low-profile card and that a PCIe x8 or x16 slot is electrically available. Confirm the target operating system is Windows 10, Windows Server 2016 or later, Linux kernel 3.3 or later, Hyper-V, Xen Server 7.6 or later, or Proxmox 6.1 or later.

Helstu kostir

  • Bootable NVMe RAID for Windows and Linux
  • Dedicated PCIe 3.0 x4 bandwidth per M.2 SSD
  • Low-profile form factor fits 1U and 2U servers
  • Hardware RAID 0 and 1 with off-the-shelf M.2 drives
  • PCIe 3.0 x16 interface works in x8 and x16 slots

Tæknilýsing

BrandHighPoint
ModelSSD7202
Form FactorLow Profile
External Connectors2 x M.2 NVMe port (Dedicated PCIe 3.0 x4 per port)
InterfacePCI-Express 3.0 x16
RAIDRAID 0/1
Operating Systems SupportedWindows 10
Windows Server 2016 or later
Linux Kernel 3.3 or later
Microsoft Hyper-V & Xen Server 7.6 and later
Proxmox 6.1 and later
Dimensions6.29" x 4.76" x 0.85"
FeaturesLow-Profile Bootable NVMe Solution for Linux & Windows
Ideal for compact, low-profile 1 &2U servers, or workstation
Flexible solution: compatible with PCIe x8 and x16 slots
Up to 2 off-the-shelf M.2 MLC, TLC & QLC NVMe SSD’s
RAID 0, 1, single disk
Dedicated PCIe 3.0 x8 bus bandwidth
Dedicated PCIe 3.0 x4 bandwidth for each NVMe M.2 SSD
Sendingarþyngd0.45 kg
Stærð sendingar203 × 152 × 76 mm

Spurningar um þessa vöru

Does the SSD7202 generate noticeable noise or heat when running continuously in a 1U server?

The card is a passive low-profile controller with no fan, so it adds no audible noise. Heat output depends on the two M.2 NVMe SSDs installed and the airflow in your chassis.

What must already be in the system for the SSD7202 to function?

A free PCIe 3.0 x8 or x16 slot and one or two off-the-shelf M.2 NVMe SSDs (MLC, TLC or QLC). The controller itself provides the RAID 0, 1 or single-disk modes.

Will the SSD7202 work alongside an older PCIe 2.0 RAID card in the same server?

Yes — the SSD7202 negotiates PCIe 3.0 x8 or x16 on its own slot and is backward-compatible with PCIe 2.0 slots, so it can coexist with legacy controllers on the same motherboard.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.