Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver rectangular 2.5 inch enterprise SSD with green circuit board visible

HP

HP J9F39A 1.6TB 2.5" SAS enterprise SSD

SKU CH-939Z-YSCS3 MPN J9F39A

A 1.6 TB SAS enterprise SSD in a 2.5 inch form factor for mainstream server workloads

  • Form Factor2.5"
  • Capacity1.6TB
  • InterfaceSAS 6Gb/s
  • 6TB capacity supports demanding enterprise workloads
  • SAS 6Gb/s interface delivers reliable data transfer
  • 5" form factor fits standard server bays
  • HP enterprise design ensures consistent performance
  • New condition guarantees full manufacturer specifications

Drive identity and target use

The HP J9F39A is a 1.6TB enterprise solid-state drive built for HP MSA storage arrays. Its SAS 6Gb/s interface and 2.5-inch form factor suit mainstream read-intensive workloads such as virtualisation, databases and boot volumes. The drive is supplied new and carries the manufacturer part number J9F39A for exact ordering.

Installation and common issues

The drive slides into any 2.5-inch SAS hot-swap bay that accepts a 6Gb/s connection; no extra cables or adapters are needed when the backplane matches the interface. Most problems arise when the array firmware is older than the drive release date of October 2016, so update the controller first.

Compatibility checklist

Verify that your MSA chassis lists the J9F39A on its supported-drive matrix and that the backplane provides a 6Gb/s SAS lane per slot. Confirm the controller firmware is current and that the array can address the full 1.6TB capacity. Buyers who need a different interface or a higher write-endurance tier should look elsewhere.

Helstu kostir

  • 6TB capacity supports demanding enterprise workloads
  • SAS 6Gb/s interface delivers reliable data transfer
  • 5" form factor fits standard server bays
  • HP enterprise design ensures consistent performance
  • New condition guarantees full manufacturer specifications

Tæknilýsing

BrandHP
ModelJ9F39A
Form Factor2.5"
Capacity1.6TB
InterfaceSAS 6Gb/s
Sendingarþyngd0.45 kg
Stærð sendingar25 × 25 × 25 mm

Spurningar um þessa vöru

How can I confirm the 1.6TB SAS 6Gb/s drive is recognised and healthy after installation?

The drive should appear in the server BIOS or RAID controller utility at its full 1.6TB capacity with a SAS 6Gb/s link speed and no SMART errors reported.

What ships with the HP J9F39A 2.5" enterprise SSD and what must be sourced separately?

The drive itself is supplied; a compatible 2.5" SAS hot-plug tray or caddy and SAS data cables are not included and must be purchased separately.

Which capacity and interface version of the HP J9F39A should I select for a 12G SAS MSA array?

This model is a single 1.6TB variant with a SAS 6Gb/s interface; choose it when a 1.6TB mainstream endurance drive at 6Gb/s speed matches your array requirements.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.