暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver rectangular 2.5 inch enterprise SSD with green circuit board visible

HP

HP J9F39A 1.6TB 2.5" SAS enterprise SSD

SKU CH-939Z-YSCS3 MPN J9F39A

A 1.6 TB SAS enterprise SSD in a 2.5 inch form factor for mainstream server workloads

  • Form Factor2.5"
  • Capacity1.6TB
  • InterfaceSAS 6Gb/s
  • 6TB capacity supports demanding enterprise workloads
  • SAS 6Gb/s interface delivers reliable data transfer
  • 5" form factor fits standard server bays
  • HP enterprise design ensures consistent performance
  • New condition guarantees full manufacturer specifications

Drive identity and target use

The HP J9F39A is a 1.6TB enterprise solid-state drive built for HP MSA storage arrays. Its SAS 6Gb/s interface and 2.5-inch form factor suit mainstream read-intensive workloads such as virtualisation, databases and boot volumes. The drive is supplied new and carries the manufacturer part number J9F39A for exact ordering.

Installation and common issues

The drive slides into any 2.5-inch SAS hot-swap bay that accepts a 6Gb/s connection; no extra cables or adapters are needed when the backplane matches the interface. Most problems arise when the array firmware is older than the drive release date of October 2016, so update the controller first.

Compatibility checklist

Verify that your MSA chassis lists the J9F39A on its supported-drive matrix and that the backplane provides a 6Gb/s SAS lane per slot. Confirm the controller firmware is current and that the array can address the full 1.6TB capacity. Buyers who need a different interface or a higher write-endurance tier should look elsewhere.

特長

  • 6TB capacity supports demanding enterprise workloads
  • SAS 6Gb/s interface delivers reliable data transfer
  • 5" form factor fits standard server bays
  • HP enterprise design ensures consistent performance
  • New condition guarantees full manufacturer specifications

仕様

BrandHP
ModelJ9F39A
Form Factor2.5"
Capacity1.6TB
InterfaceSAS 6Gb/s
配送重量0.45 kg
梱包サイズ25 × 25 × 25 mm

この商品に関する質問

How can I confirm the 1.6TB SAS 6Gb/s drive is recognised and healthy after installation?

The drive should appear in the server BIOS or RAID controller utility at its full 1.6TB capacity with a SAS 6Gb/s link speed and no SMART errors reported.

What ships with the HP J9F39A 2.5" enterprise SSD and what must be sourced separately?

The drive itself is supplied; a compatible 2.5" SAS hot-plug tray or caddy and SAS data cables are not included and must be purchased separately.

Which capacity and interface version of the HP J9F39A should I select for a 12G SAS MSA array?

This model is a single 1.6TB variant with a SAS 6Gb/s interface; choose it when a 1.6TB mainstream endurance drive at 6Gb/s speed matches your array requirements.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。