Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
HP QLogic QLE2660 single port Fibre Channel HBA high profile card with LC connector

HP

HP QLogic QLE2660 16Gb Single Port PCIe Fibre Channel HBA

SKU CH-JXVV-1XTYZ

Single-port 16 Gbps Fibre Channel host bus adapter with 1 GB on-board memory and PCI Express 3.0 x8 interface for enterprise SAN connectivity

  • Speed16Gbps
  • ConnectorsLC
  • InterfacePCI Express 3.0 x8
  • On-board Memory1 GB RAM
  • Features16Gb Fibre Channel performance Backward compatible with 8Gb
  • 16 Gbps Fibre Channel speed accelerates SAN throughput
  • PCI Express 3.0 x8 interface maximises host bandwidth
  • Single LC port connects directly to 16 Gb, 8 Gb or 4 Gb fabrics
  • 1 GB on-board memory buffers heavy I/O workloads
  • NPIV and N_Port ID virtualisation enable multi-tenant storage access

Single-port 16Gb Fibre Channel HBA

The HP QLogic QLE2660 is a high-profile PCI Express 3.0 host bus adapter that provides one 16Gbps Fibre Channel port via an LC connector. It is built on the QLogic SN1000Q architecture with 1 GB of on-board memory to deliver low-latency throughput for enterprise storage area networks. The card is validated for HP ProLiant servers and maintains backward compatibility with 8Gb and 4Gb Fibre Channel devices.

Suited for single-path SAN connections.

This adapter fits administrators who need a single 16Gbps link into an existing Fibre Channel fabric and who value QLogic NPIV and N_Port ID virtualization support for server virtualization. It does not serve environments that require two physical ports on one card for path redundancy or link aggregation, nor does it address workloads that demand a different bus interface or port count.

PCI Express 3.0 x4 bus interface

The card plugs into a PCI Express 3.0 x4 slot, which is the sole electrical interface that determines whether the adapter can be installed in a given server chassis. Confirm that the target system provides a compatible x4 or larger slot before purchase.

Helstu kostir

  • 16 Gbps Fibre Channel speed accelerates SAN throughput
  • PCI Express 3.0 x8 interface maximises host bandwidth
  • Single LC port connects directly to 16 Gb, 8 Gb or 4 Gb fabrics
  • 1 GB on-board memory buffers heavy I/O workloads
  • NPIV and N_Port ID virtualisation enable multi-tenant storage access

Tæknilýsing

BrandHp
ModelQLE2660
Part NumberQW971A, 699764-001
Speed16Gbps
ConnectorsLC
InterfacePCI Express 3.0 x8
On-board Memory1 GB RAM
Features16Gb Fibre Channel performance
Backward compatible with 8Gb and 4Gb FC devices
Supports NPIV and N_Port ID virtualization
Optimized for enterprise-class SAN environments
Compatible with HP ProLiant servers
QLogic SN1000Q controller for high throughput and low latency.

Spurningar um þessa vöru

Will the PCIe 3.0 x4 slot bottleneck the 16Gbps Fibre Channel port under sustained load?

The adapter uses a PCIe 3.0 x4 interface which provides enough throughput for the single 16Gbps port to operate at full line rate.

How much heat and power should I expect when this card runs continuously in a server?

The high-profile plug-in card draws power from the PCIe slot and is designed for enterprise SAN environments with standard server cooling.

Which HP ProLiant servers have a compatible PCIe 3.0 x4 slot for this high-profile HBA?

The card fits any HP ProLiant server with an available PCIe 3.0 x4 or larger slot that accepts a high-profile plug-in card.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.