Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green rectangular circuit board with gold edge connector and black controller chips, M.2 2280 form factor

HPE

HPE 480GB Mixed Use SATA M.2 2280 internal SSD P20608-002

SKU CH-Q2D8-Q301S

Mixed-use SATA M.2 2280 drive stores 480 GB with up to 510 MBps sequential read, 4800 MBps sequential write, 76000 IOPS random read and 39500 IOPS random write

  • Device TypeInternal Solid State Drive (SSD)
  • Form FactorM.2 2280
  • Capacity480GB
  • InterfacePCI Express
  • Max Sequential ReadUp to 510 MBps
  • Max Sequential WriteUp to 4800 MBps
  • 480 GB capacity stores large datasets
  • SATA 6 Gbps interface delivers up to 510 MB/s sequential reads
  • M.2 2280 form factor fits compact server slots
  • Mixed-use TLC endurance handles read and write workloads
  • 76,000 random read IOPS accelerates database queries

Capacity and interface

The HPE P20608-002 is a 480GB internal solid-state drive built for mixed-use workloads. It uses the SATA 6Gbps interface in an M.2 2280 form factor with triple-level cell flash.

Upgrade path

This drive replaces slower mechanical disks or lower-endurance SATA SSDs in Gen10 server platforms. The jump is worth it when workloads need higher random IOPS and consistent write throughput without moving to a different interface.

SATA interface limits

The SATA 6Gbps link caps sequential reads at 510 MBps and writes at 4800 MBps. Random performance reaches 76000 read IOPS and 39500 write IOPS, which defines the practical ceiling for this drive in any compatible slot.

Helstu kostir

  • 480 GB capacity stores large datasets
  • SATA 6 Gbps interface delivers up to 510 MB/s sequential reads
  • M.2 2280 form factor fits compact server slots
  • Mixed-use TLC endurance handles read and write workloads
  • 76,000 random read IOPS accelerates database queries

Tæknilýsing

BrandHPE
Part NumberP20608-002
Device TypeInternal Solid State Drive (SSD)
Form FactorM.2 2280
Capacity480GB
InterfacePCI Express
Max Sequential ReadUp to 510 MBps
Max Sequential WriteUp to 4800 MBps
4KB Random ReadUp to 76,000 IOPS
4KB Random WriteUp to 39,500 IOPS

Spurningar um þessa vöru

What motherboard slot length and keying does the M.2 2280 form factor require?

The drive uses the M.2 2280 form factor, so the motherboard must provide an M-key or B+M-key slot that accepts 80 mm long modules.

Which step do installers often miss when fitting this drive into a Gen 10 server?

Many forget to enable the SATA 6Gbps controller in the system BIOS before the operating system will recognise the 480 GB volume.

When should the 480 GB mixed-use SSD be replaced based on its write endurance rating?

With up to 39,500 random write IOPS and 4,800 MBps sequential write, plan replacement once the drive's SMART media-wear indicator approaches the rated endurance limit.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.