HPE
HPE 480GB Mixed Use SATA M.2 2280 internal SSD P20608-002
Mixed-use SATA M.2 2280 drive stores 480 GB with up to 510 MBps sequential read, 4800 MBps sequential write, 76000 IOPS random read and 39500 IOPS random write
- Device TypeInternal Solid State Drive (SSD)
- Form FactorM.2 2280
- Capacity480GB
- InterfacePCI Express
- Max Sequential ReadUp to 510 MBps
- Max Sequential WriteUp to 4800 MBps
- 480 GB capacity stores large datasets
- SATA 6 Gbps interface delivers up to 510 MB/s sequential reads
- M.2 2280 form factor fits compact server slots
- Mixed-use TLC endurance handles read and write workloads
- 76,000 random read IOPS accelerates database queries
Capacity and interface
The HPE P20608-002 is a 480GB internal solid-state drive built for mixed-use workloads. It uses the SATA 6Gbps interface in an M.2 2280 form factor with triple-level cell flash.
Upgrade path
This drive replaces slower mechanical disks or lower-endurance SATA SSDs in Gen10 server platforms. The jump is worth it when workloads need higher random IOPS and consistent write throughput without moving to a different interface.
SATA interface limits
The SATA 6Gbps link caps sequential reads at 510 MBps and writes at 4800 MBps. Random performance reaches 76000 read IOPS and 39500 write IOPS, which defines the practical ceiling for this drive in any compatible slot.
Punti di forza
- 480 GB capacity stores large datasets
- SATA 6 Gbps interface delivers up to 510 MB/s sequential reads
- M.2 2280 form factor fits compact server slots
- Mixed-use TLC endurance handles read and write workloads
- 76,000 random read IOPS accelerates database queries
Caratteristiche tecniche
| Brand | HPE |
|---|---|
| Part Number | P20608-002 |
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | M.2 2280 |
| Capacity | 480GB |
| Interface | PCI Express |
| Max Sequential Read | Up to 510 MBps |
| Max Sequential Write | Up to 4800 MBps |
| 4KB Random Read | Up to 76,000 IOPS |
| 4KB Random Write | Up to 39,500 IOPS |
Domande su questo articolo
What motherboard slot length and keying does the M.2 2280 form factor require?
The drive uses the M.2 2280 form factor, so the motherboard must provide an M-key or B+M-key slot that accepts 80 mm long modules.
Which step do installers often miss when fitting this drive into a Gen 10 server?
Many forget to enable the SATA 6Gbps controller in the system BIOS before the operating system will recognise the 480 GB volume.
When should the 480 GB mixed-use SSD be replaced based on its write endurance rating?
With up to 39,500 random write IOPS and 4,800 MBps sequential write, plan replacement once the drive's SMART media-wear indicator approaches the rated endurance limit.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
