Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
HPE BL460c G10 blade server, rectangular metal chassis with front drive bays and connector edge

HPE

HPE BL460c G10 blade server 2x Xeon Platinum 8256 48GB DDR4 2x 1.8TB SAS HDD

SKU CH-975G-Z0T20

Blade server with dual Xeon Platinum 8256 CPUs at 3.8 GHz, 48 GB DDR4 memory, and two 1.8 TB SAS hard drives

  • TypeBlade
  • CPU TypeIntel Xeon
  • CPU Speed3.8 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size48GB
  • Dual Xeon Platinum 8256 CPUs at 3.8 GHz deliver high compute density
  • 48 GB DDR4 ECC registered memory supports demanding virtualization workloads
  • Dual 1.8 TB SAS drives provide redundant local storage
  • Smart Array P204i-b SR controller enables hardware RAID protection
  • Integrated iLO Advanced remote management simplifies server administration

Blade server for dual Xeon Platinum workloads

The HPE BL460c G10 is a new blade server fitted with two Xeon Platinum 8256 processors running at 3.8 GHz. It ships with 48 GB of DDR4 memory and a maximum capacity of 128 GB. Two 1.8 TB SAS hard drives connect through an HP Smart Array P204i-b SR controller. Integrated iLO Advanced handles remote management.

Suited for dense compute in blade enclosures

This half-height blade targets workloads that need high per-core frequency and shared infrastructure for power, cooling and networking. It is not for buyers who require GPU acceleration, more than two internal 2.5-inch drives, or a standalone rack-mount form factor. The 48 GB starting memory may also limit very large in-memory databases without extra DIMMs.

Dual Xeon Platinum 8256 at 3.8 GHz

The pair of four-core Xeon Platinum 8256 CPUs delivers 3.8 GHz base frequency with 16.5 MB cache each. This clock speed and core count combination drives single-thread performance for latency-sensitive applications. If the workload scales better with higher core counts at lower frequencies, a different processor choice would be appropriate.

Helstu kostir

  • Dual Xeon Platinum 8256 CPUs at 3.8 GHz deliver high compute density
  • 48 GB DDR4 ECC registered memory supports demanding virtualization workloads
  • Dual 1.8 TB SAS drives provide redundant local storage
  • Smart Array P204i-b SR controller enables hardware RAID protection
  • Integrated iLO Advanced remote management simplifies server administration

Tæknilýsing

BrandHP
SeriesProliant BL
ModelBlade
TypeBlade
CPU TypeIntel Xeon
CPU Speed3.8 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size48GB
Memory TypeDDR4 SDRAM
Max Memory Capacity128GB
Hard Drive (Installed)3,60
Storage ControllerHP Smart Array P204i-b SR Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementIntegrated Lights-Out (iLO) Advanced
Dimensions22 x 22x 10 in
Weight20

Spurningar um þessa vöru

Does the 3.8 GHz Xeon Platinum 8256 share the same DDR4 memory voltage as my existing DDR4 modules?

The installed DDR4 ECC registered memory runs at the standard DDR4 voltage used by this blade server generation.

How can I verify the Smart Array P204i-b SR controller sees both 1.8TB SAS drives after installation?

During POST the controller BIOS will list both drives, and the HPE iLO remote management interface shows the logical drive status once the blade is powered on.

Which installed components are included with the blade and which items such as rail kits are separate?

The blade ships with two Xeon Platinum 8256 processors, 48GB DDR4 ECC registered memory, two 1.8TB SAS hard drives, the Smart Array P204i-b SR controller and the integrated FlexFabric 20GB 2-port 650FLB adapter; rail kits are available on request.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.