Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver 2U rack server with eight front drive bays

HPE

HPE DL380 Gen9 8SFF 2x Xeon E5-2620 v4 256GB DDR4 rack server

SKU CH-BBHR-9NYBX

Dual Xeon E5-2620 v4 processors and 256GB DDR4 memory in an 8-bay rack chassis for virtualisation and database workloads

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.1GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size256GB
  • Dual Xeon E5-2620 v4 CPUs at 2.1GHz for multi-threaded performance
  • 256GB DDR4 ECC memory supports large virtualised workloads
  • P440 SAS controller manages up to 8 drive bays
  • iLO Advanced remote management enables out-of-band control
  • Dual 500W power supplies provide redundancy

HPE DL380 Gen9 8SFF dual Xeon server

The HPE DL380 Gen9 8SFF chassis arrives with two Xeon E5-2620 v4 processors at 2.1GHz and 256GB of DDR4 ECC registered memory pre-installed. It targets virtualisation hosts, database nodes and compute clusters that need dense 2.5-inch drive capacity in a 2U rack footprint. Buyers who need GPU acceleration or more than two sockets should look elsewhere.

Installation notes and common pitfalls

The unit ships with dual 500W Flex Slot power supplies, a P440 PCIe SAS controller and an Intel I350/X540 network card providing two 10GbE and two 1GbE ports. Drive caddies for the eight SFF bays are not included and must be ordered separately. Firmware and BIOS are updated to the latest stable release before dispatch.

Pre-order compatibility checks

Verify that your rack can accept a 36 x 24 x 10 inch 2U enclosure and that the facility provides adequate cooling for a 40-pound chassis. Confirm the SAS backplane matches your intended drive protocol and that iLO Advanced licensing meets your remote-management requirements. Rail kits are available on request if not already in your rack inventory.

Helstu kostir

  • Dual Xeon E5-2620 v4 CPUs at 2.1GHz for multi-threaded performance
  • 256GB DDR4 ECC memory supports large virtualised workloads
  • P440 SAS controller manages up to 8 drive bays
  • iLO Advanced remote management enables out-of-band control
  • Dual 500W power supplies provide redundancy

Tæknilýsing

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.1GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size256GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)7,20
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Spurningar um þessa vöru

How do I verify the P440 SAS controller sees all installed drives after setup?

After power-on, open the P440 BIOS utility or HPE iLO Advanced to confirm the controller detects every SAS drive in the 8SFF bays and reports healthy RAID arrays.

What components ship with the server and what must I supply?

The unit includes 2x Xeon E5-2620 v4 CPUs, 256GB DDR4 ECC Registered memory, P440 PCIe SAS controller, Intel I350/X540 2x 10GbE + 2x 1GbE NIC, 2x 500W Flex Slot power supplies and rails on request; 2.5" SAS drives are not included.

Should I choose the 256GB DDR4 configuration or add more memory up to the 3TB limit?

Start with the installed 256GB DDR4 ECC Registered if current workloads fit; add registered DDR4 modules later — up to the 3TB maximum — when virtualization or database demand grows.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.