Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Intel 10G SFP+ transceiver module with LC connector

Intel

Intel 10GFC SFP+ Transceiver 850nm MMF LC (FTLX8571D3BCV-IT)

SKU CH-V7NS-F8V1A

A 10 Gbps fibre transceiver using 850 nm VCSEL optics with LC connectors for multimode links

  • 10 Gbps Fibre Channel speed for high-bandwidth storage links
  • 850 nm VCSEL laser enables multimode fibre connectivity
  • LC duplex connector ensures secure, low-loss mating
  • Intel-branded SFP+ module validated for server systems

Intel 10GFC SFP+ Transceiver

The Intel 10GFC SFP+ transceiver operates at 850 nm over multimode fibre with an LC connector. It is built for servers and storage arrays that need short-range 10 Gb Fibre Channel links. Network engineers and system integrators use it to connect switches, HBAs and storage controllers within a rack or data-hall row.

10 Gb Fibre Channel headroom

The module handles 10 Gb Fibre Channel traffic across standard OM3 or OM4 multimode runs. It reaches its distance limit when the fibre span exceeds the 850 nm multimode budget, so longer campus or building-to-building links need single-mode optics instead. Buyers who need extended reach or DWDM wavelengths cannot use this transceiver.

Helstu kostir

  • 10 Gbps Fibre Channel speed for high-bandwidth storage links
  • 850 nm VCSEL laser enables multimode fibre connectivity
  • LC duplex connector ensures secure, low-loss mating
  • Intel-branded SFP+ module validated for server systems

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

Will the 10 GFC SFP+ transceiver operate alongside my existing 8 GFC host bus adapters?

The module runs at a fixed 10 GFC line rate and is not backward-compatible with 8 GFC links; it requires a 10 GFC port on the switch or HBA to establish a link.

How can I verify the 850 nm VCSEL is transmitting after I insert the transceiver?

Check the switch or HBA port LEDs for a solid link light and confirm the interface shows a 10 GFC connection with valid receive optical power in the management console.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.