Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Intel 10G SFP+ transceiver module with LC connector

Intel

Intel 10GFC SFP+ Transceiver 850nm MMF LC (FTLX8571D3BCV-IT)

SKU CH-V7NS-F8V1A

A 10 Gbps fibre transceiver using 850 nm VCSEL optics with LC connectors for multimode links

  • 10 Gbps Fibre Channel speed for high-bandwidth storage links
  • 850 nm VCSEL laser enables multimode fibre connectivity
  • LC duplex connector ensures secure, low-loss mating
  • Intel-branded SFP+ module validated for server systems

Intel 10GFC SFP+ Transceiver

The Intel 10GFC SFP+ transceiver operates at 850 nm over multimode fibre with an LC connector. It is built for servers and storage arrays that need short-range 10 Gb Fibre Channel links. Network engineers and system integrators use it to connect switches, HBAs and storage controllers within a rack or data-hall row.

10 Gb Fibre Channel headroom

The module handles 10 Gb Fibre Channel traffic across standard OM3 or OM4 multimode runs. It reaches its distance limit when the fibre span exceeds the 850 nm multimode budget, so longer campus or building-to-building links need single-mode optics instead. Buyers who need extended reach or DWDM wavelengths cannot use this transceiver.

Poudarki

  • 10 Gbps Fibre Channel speed for high-bandwidth storage links
  • 850 nm VCSEL laser enables multimode fibre connectivity
  • LC duplex connector ensures secure, low-loss mating
  • Intel-branded SFP+ module validated for server systems

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

Will the 10 GFC SFP+ transceiver operate alongside my existing 8 GFC host bus adapters?

The module runs at a fixed 10 GFC line rate and is not backward-compatible with 8 GFC links; it requires a 10 GFC port on the switch or HBA to establish a link.

How can I verify the 850 nm VCSEL is transmitting after I insert the transceiver?

Check the switch or HBA port LEDs for a solid link light and confirm the interface shows a 10 GFC connection with valid receive optical power in the management console.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.