Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver 2.5 inch enterprise SSD with PCIe 3.0 x4 connector and 1.2TB label

Intel

Intel SSDPE2MX012T701 1.2TB 2.5" PCIe 3.0 x4 MLC enterprise SSD

SKU CH-YQ5A-F1DP3 MPN SSDPE2MX012T701

2.5-inch PCIe 3.0 x4 enterprise SSD with 1.2TB MLC storage delivering 1700MBps reads and 1300MBps writes

  • Form Factor2.5"
  • Capacity1.2TB
  • Memory ComponentsMLC
  • InterfacePCI-Express 3.0 x4
  • Max Sequential ReadUp to 1700 MBps
  • Max Sequential WriteUp to 1300 MBps

Options 1.2TB 2.5"

  • 2 TB capacity for high-density server storage
  • PCIe 3.0 x4 interface delivers up to 1700 MB/s sequential read speed
  • MLC memory sustains up to 320,000 random read IOPS
  • 2 million hour MTBF supports continuous enterprise workloads
  • 5 inch form factor fits standard drive bays

1.2 TB PCIe 3.0 x4 MLC enterprise SSD

The Intel SSDPE2MX012T701 is a 2.5 inch enterprise solid-state drive with 1.2 TB capacity and a PCI-Express 3.0 x4 interface. It uses MLC memory components and is built for servers that need consistent performance in read-heavy workloads.

Sustained write behaviour

Sequential write speed reaches up to 1300 MBps while random write performance delivers up to 26,000 IOPS at 4 KB. Write latency is rated at 20 µs and active write power draws 11 W, allowing steady throughput without the sharp drops seen in burst-only drives.

PCIe 3.0 x4 interface limits

The four-lane PCIe 3.0 link caps sequential reads at 1700 MBps and random reads at 320,000 IOPS. Operating temperature is limited to 0 °C to 35 °C and the drive tolerates 2.17 GRMS vibration while running, so dense chassis must provide adequate airflow to stay within spec.

Helstu kostir

  • 2 TB capacity for high-density server storage
  • PCIe 3.0 x4 interface delivers up to 1700 MB/s sequential read speed
  • MLC memory sustains up to 320,000 random read IOPS
  • 2 million hour MTBF supports continuous enterprise workloads
  • 5 inch form factor fits standard drive bays

Tæknilýsing

BrandIntel
ModelSSDPE2MX012T701
Form Factor2.5"
Capacity1.2TB
Memory ComponentsMLC
InterfacePCI-Express 3.0 x4
Max Sequential ReadUp to 1700 MBps
Max Sequential WriteUp to 1300 MBps
4KB Random ReadUp to 320,000 IOPS
4KB Random WriteUp to 26,000 IOPS
Read Latency20 µs
Write Latency20 µs
MTBF2,000,000 hours
Power Consumption (Idle)4W
Power Consumption (Active)11W (Write)
9W (Read)
Operating Temperature0°C ~ +35°C
Max Shock Resistance1000G/0.5msec
Max Vibration ResistanceOperating: 2.17 GRMS
Non-Operating: 3.13 GRMS
Height15.00mm
Weight125.00g
Sendingarþyngd0.16 kg
Stærð sendingar150 × 107 × 28 mm

Aðrar útgáfur af þessari vöru

1 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How much power does the Intel SSDPE2MX012T701 draw when reading or writing continuously?

Active power is 9W during reads and 11W during writes, while idle power is 4W.

What slot and form factor does the SSDPE2MX012T701 require on my server board?

It needs a 2.5" PCI-Express 3.0 x4 slot; the drive is 15.00mm high and weighs 125.00g.

Will the 1.2TB PCIe 3.0 x4 MLC drive work in a system that only has older PCIe 2.0 slots?

The drive uses a PCI-Express 3.0 x4 interface; it will negotiate down to the slot speed available.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.