Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
JONSBO
A 120 mm case fan with a 15 mm profile, PWM speed control from 700 to 1800 rpm, airflow of 13.1 to 62 CFM, noise of 18.6 to 29.7 dBA.
The JONSBO HF1215 is a 120 mm case fan measuring just 15 mm thick, designed for builds where standard 25 mm fans cannot fit. Its slim frame suits compact chassis, radiator push-pull setups, or tight clearances around motherboard heatsinks. The fan uses a Dynamic Hydraulic Bearing rated for 50000 hours MTTF at 25 °C and ships with eight rubber cushioning pads to decouple vibration from the case.
This fan replaces a conventional 25 mm model when space behind the motherboard tray or between components is limited. The thinner profile allows installation in narrow radiator stacks or shallow cases without sacrificing a 120 mm mounting pattern. The performance gain is worthwhile when a thicker fan would physically foul cables, a pump top, or a large CPU cooler base, letting the builder keep full 120 mm airflow in a constrained volume.
Speed is regulated by a 4-pin PWM signal across a 700 to 1800 rpm range, delivering 13.1 to 62 CFM at 18.6 to 29.7 dBA. The addressable RGB lighting requires a motherboard 5 V 3-pin header; it will not function on 12 V RGB or non-addressable headers. Maximum airflow and static pressure are bounded by the 15 mm blade depth, so the fan suits moderate cooling loads rather than high-restriction radiators demanding peak static pressure.
| Brand | JONSBO |
|---|---|
| Series | Performance ARGB 15 mm Thin Light Fan |
| Model | HF1215 |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 15mm |
| Bearing Type | Dynamic Hydraulic Bearing |
| RPM | 700 - 1800rpm |
| Air Flow | 13.1 - 62CFM |
| Noise Level | 18.6 -29.7dBA |
| Power Connector | 4 Pin |
| Color | Black |
| LED | Addressable RGB |
| Features | Performance ARGB 15 mm Thin Light Fan, FDB Dynamic Hydraulic Bearing,Shock Absorption and Low Noise Intelligent Control of Motor Speed,High Wind Pressure Fan Blade, |
| Dimensions | 120mm(L)*120mm(W)*15mm(H) |
Yes, the fan is 120 mm square and only 15 mm thick, so it fits any standard 120 mm mounting points that have at least 15 mm clearance.
Plug the 4-pin connector into a motherboard PWM fan header for speed control and the 3-pin connector into a 5 V addressable RGB header for lighting sync.
The bearing is rated for 50000 hours MTTF at 25 °C, which typically means several years of continuous use before replacement is needed.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?