Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
JONSBO
A 120 mm case fan with a 15 mm profile, PWM speed control from 700 to 1800 rpm, airflow of 13.1 to 62 CFM, noise of 18.6 to 29.7 dBA.
The JONSBO HF1215 is a 120 mm case fan measuring just 15 mm thick, designed for builds where standard 25 mm fans cannot fit. Its slim frame suits compact chassis, radiator push-pull setups, or tight clearances around motherboard heatsinks. The fan uses a Dynamic Hydraulic Bearing rated for 50000 hours MTTF at 25 °C and ships with eight rubber cushioning pads to decouple vibration from the case.
This fan replaces a conventional 25 mm model when space behind the motherboard tray or between components is limited. The thinner profile allows installation in narrow radiator stacks or shallow cases without sacrificing a 120 mm mounting pattern. The performance gain is worthwhile when a thicker fan would physically foul cables, a pump top, or a large CPU cooler base, letting the builder keep full 120 mm airflow in a constrained volume.
Speed is regulated by a 4-pin PWM signal across a 700 to 1800 rpm range, delivering 13.1 to 62 CFM at 18.6 to 29.7 dBA. The addressable RGB lighting requires a motherboard 5 V 3-pin header; it will not function on 12 V RGB or non-addressable headers. Maximum airflow and static pressure are bounded by the 15 mm blade depth, so the fan suits moderate cooling loads rather than high-restriction radiators demanding peak static pressure.
| Brand | JONSBO |
|---|---|
| Series | Performance ARGB 15 mm Thin Light Fan |
| Model | HF1215 |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 15mm |
| Bearing Type | Dynamic Hydraulic Bearing |
| RPM | 700 - 1800rpm |
| Air Flow | 13.1 - 62CFM |
| Noise Level | 18.6 -29.7dBA |
| Power Connector | 4 Pin |
| Color | Black |
| LED | Addressable RGB |
| Features | Performance ARGB 15 mm Thin Light Fan, FDB Dynamic Hydraulic Bearing,Shock Absorption and Low Noise Intelligent Control of Motor Speed,High Wind Pressure Fan Blade, |
| Dimensions | 120mm(L)*120mm(W)*15mm(H) |
Yes, the fan is 120 mm square and only 15 mm thick, so it fits any standard 120 mm mounting points that have at least 15 mm clearance.
Plug the 4-pin connector into a motherboard PWM fan header for speed control and the 3-pin connector into a 5 V addressable RGB header for lighting sync.
The bearing is rated for 50000 hours MTTF at 25 °C, which typically means several years of continuous use before replacement is needed.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?