Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Small green circuit board with silver camera module and USB port

KEHIPI

KEHIPI ESP32-S3 CAM Board 16 MB Flash development board

SKU CH-PH0A-MJ3XN

Dual-core 32-bit board with 16 MB Flash, 8 MB PSRAM, onboard camera, Wi-Fi and Bluetooth 5, plus tutorial projects and a 1 GB memory card

  • Dual-core 32-bit processor at 240 MHz for responsive edge computing
  • 16 MB flash plus 8 MB PSRAM keeps large sketches in memory
  • Onboard camera enables instant image capture and streaming projects
  • 4 GHz Wi-Fi with Bluetooth 5 for wireless IoT connectivity
  • MicroPython and C tutorials with step-by-step projects accelerate learning

ESP32-S3 Development Board with Camera

The KEHIPI ESP32-S3 CAM board is a compact IoT edge device built around a dual-core 32-bit microprocessor clocked at 240 MHz. It integrates 16 MB Flash, 8 MB PSRAM, 2.4 GHz Wi-Fi and Bluetooth 5, plus an onboard camera. The kit includes a 1 GB memory card for local file storage and targets makers learning embedded vision or wireless projects.

Step Up from Basic Microcontrollers

This board replaces simpler single-core modules that lack integrated wireless or camera support. The jump is worth it when a project needs simultaneous Wi-Fi and Bluetooth 5 connectivity, on-device image capture, or the headroom of 16 MB Flash and 8 MB PSRAM for larger firmware or MicroPython scripts. Builders staying with basic GPIO tasks will not use these extras.

Fits a USB-Powered Prototype Build

The board connects to a host computer via USB for programming in C or MicroPython using the supplied tutorial and example projects. It needs a host IDE and driver installed, and the included memory card slots directly onto the board for logging or frame storage. No external radio modules or camera wiring are required, freeing GPIO pins for sensors or actuators.

Helstu kostir

  • Dual-core 32-bit processor at 240 MHz for responsive edge computing
  • 16 MB flash plus 8 MB PSRAM keeps large sketches in memory
  • Onboard camera enables instant image capture and streaming projects
  • 4 GHz Wi-Fi with Bluetooth 5 for wireless IoT connectivity
  • MicroPython and C tutorials with step-by-step projects accelerate learning

Tæknilýsing

BrandFREENOVE
ModelFNK0085B
Part NumberFNK0085B

Spurningar um þessa vöru

What physical space does the KEHIPI ESP32-S3 CAM board need to fit inside an enclosure?

The board measures 85 mm in length; allow extra room for the USB cable, camera module and a 1 GB micro-SD card inserted in the onboard slot.

How do I install the board and what step is often missed?

Install the USB driver and your chosen IDE, then connect the board via USB; the step people skip is putting the board into download mode before uploading MicroPython or C code.

What will need replacement or maintenance later?

The 1 GB micro-SD card supplied with the kit may wear out after heavy read-write cycles and should be swapped for a fresh card when errors appear.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.