Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Small green circuit board with silver camera module and USB port

KEHIPI

KEHIPI ESP32-S3 CAM Board 16 MB Flash development board

SKU CH-PH0A-MJ3XN

Dual-core 32-bit board with 16 MB Flash, 8 MB PSRAM, onboard camera, Wi-Fi and Bluetooth 5, plus tutorial projects and a 1 GB memory card

  • Dual-core 32-bit processor at 240 MHz for responsive edge computing
  • 16 MB flash plus 8 MB PSRAM keeps large sketches in memory
  • Onboard camera enables instant image capture and streaming projects
  • 4 GHz Wi-Fi with Bluetooth 5 for wireless IoT connectivity
  • MicroPython and C tutorials with step-by-step projects accelerate learning

ESP32-S3 Development Board with Camera

The KEHIPI ESP32-S3 CAM board is a compact IoT edge device built around a dual-core 32-bit microprocessor clocked at 240 MHz. It integrates 16 MB Flash, 8 MB PSRAM, 2.4 GHz Wi-Fi and Bluetooth 5, plus an onboard camera. The kit includes a 1 GB memory card for local file storage and targets makers learning embedded vision or wireless projects.

Step Up from Basic Microcontrollers

This board replaces simpler single-core modules that lack integrated wireless or camera support. The jump is worth it when a project needs simultaneous Wi-Fi and Bluetooth 5 connectivity, on-device image capture, or the headroom of 16 MB Flash and 8 MB PSRAM for larger firmware or MicroPython scripts. Builders staying with basic GPIO tasks will not use these extras.

Fits a USB-Powered Prototype Build

The board connects to a host computer via USB for programming in C or MicroPython using the supplied tutorial and example projects. It needs a host IDE and driver installed, and the included memory card slots directly onto the board for logging or frame storage. No external radio modules or camera wiring are required, freeing GPIO pins for sensors or actuators.

Přednosti

  • Dual-core 32-bit processor at 240 MHz for responsive edge computing
  • 16 MB flash plus 8 MB PSRAM keeps large sketches in memory
  • Onboard camera enables instant image capture and streaming projects
  • 4 GHz Wi-Fi with Bluetooth 5 for wireless IoT connectivity
  • MicroPython and C tutorials with step-by-step projects accelerate learning

Specifikace

BrandFREENOVE
ModelFNK0085B
Part NumberFNK0085B

Otázky k tomuto produktu

What physical space does the KEHIPI ESP32-S3 CAM board need to fit inside an enclosure?

The board measures 85 mm in length; allow extra room for the USB cable, camera module and a 1 GB micro-SD card inserted in the onboard slot.

How do I install the board and what step is often missed?

Install the USB driver and your chosen IDE, then connect the board via USB; the step people skip is putting the board into download mode before uploading MicroPython or C code.

What will need replacement or maintenance later?

The 1 GB micro-SD card supplied with the kit may wear out after heavy read-write cycles and should be swapped for a fresh card when errors appear.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.