Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Small square LCD panel with resistive touch layer and 3.5 mm audio jack

LORDWORLD

LORDWORLD 4inch IPS Resistive Touch Screen 480x800 development board

SKU CH-NRB3-XCSXN

A 4-inch IPS resistive touch display with 480x800 resolution and 3.5 mm audio jack, directly compatible with most Raspberry Pi revisions

  • 4-inch IPS panel delivers 480×800 resolution for crisp visuals
  • Resistive touch control enables direct interaction without extra peripherals
  • 5 mm audio jack plus HDMI audio output for flexible sound options
  • Plugs straight into any Raspberry Pi revision except Pi 1 Model B and Pi Zero
  • Works as a standard HDMI monitor when touch is not needed

4-inch IPS Resistive Touch Development Board

The LORDWORLD 4-inch IPS resistive touch screen offers a 480x800 hardware resolution and a 3.5 mm audio jack with HDMI audio output. It connects directly to any revision of Raspberry Pi except the Pi 1 Model B or Pi Zero, which need an HDMI cable. Drivers are supplied for Raspbian, Ubuntu, Kali and Retropie systems. The HDMI interface handles video without using GPIO pins, though the touch panel still requires I/O connections.

Replaces Basic HDMI Monitors for Pi Projects

This board upgrades a standard HDMI monitor by adding integrated resistive touch control and direct GPIO mounting for Raspberry Pi boards. The jump is worth it when you need a compact, self-contained display with touch input for portable or embedded projects. It removes the need for a separate screen, cables and mounting hardware while keeping the same HDMI video path. Builders who need a second independent display or a purely HDMI-driven monitor without touch should look elsewhere.

480x800 Resolution with Resistive Touch Headroom

The 480x800 panel comfortably handles Raspberry Pi desktop environments, media playback and retro-gaming interfaces at native resolution. The resistive layer supports single-touch operation for menus, buttons and on-screen keyboards. Headroom runs out with multi-touch gestures, high-DPI applications or capacitive-style swipes, which the resistive technology cannot detect. When used as a generic computer monitor the touch function is disabled, leaving only the 480x800 video display.

Helstu kostir

  • 4-inch IPS panel delivers 480×800 resolution for crisp visuals
  • Resistive touch control enables direct interaction without extra peripherals
  • 5 mm audio jack plus HDMI audio output for flexible sound options
  • Plugs straight into any Raspberry Pi revision except Pi 1 Model B and Pi Zero
  • Works as a standard HDMI monitor when touch is not needed

Tæknilýsing

BrandLORDWORLD

Spurningar um þessa vöru

How much GPIO space does the 4-inch screen leave free on a Raspberry Pi?

The display plugs straight onto the 40-pin header and uses the pins needed for resistive touch control; the remaining GPIO lines stay accessible for other add-ons.

What is the first step when setting up the board with a fresh Raspberry Pi OS image?

Write the supplied driver overlay to the boot partition and enable it in config.txt before the first boot; skipping this step leaves the touch layer unresponsive.

Does the resistive layer on this 480 by 800 panel wear out and need replacement?

Resistive touch panels do not have a user-replaceable overlay; normal stylus or fingertip use lasts for years, and the whole display module is swapped only if the layer fails.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.