Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Small green circuit board with USB-C port and pre-soldered pin headers

LORDWORLD

LORDWORLD ESP32-C3FN4 Mini Development Board Pre-Soldered Header

SKU CH-TN51-59B6S

Compact IoT board with RISC-V processor at 160 MHz, 2.4 GHz Wi-Fi, Bluetooth 5, 400 KB SRAM and 15 GPIO pins

  • RISC-V 32-bit single-core processor at 160MHz enables fast edge computing
  • 4GHz Wi-Fi 802.11 b/g/n plus Bluetooth 5 gives wireless connectivity
  • 400KB SRAM and 384KB ROM with 4MB Flash provides ample memory
  • 15 GPIO pins with 3 SPI, I2C, 2 UART, I2S, 2 ADC allow flexible I/O
  • USB Type-C with integrated serial controller simplifies programming and power

ESP32-C3FN4 Mini Development Board

This ESP32-C3FN4 mini development board is a low-power IoT edge device built around a RISC-V 32-bit single-core processor. It targets makers and engineers prototyping wireless projects that need integrated connectivity in a compact form factor. The board arrives with headers pre-soldered for immediate breadboard use.

RISC-V 32-bit single-core processor at 160MHz

The deciding specification is the RISC-V 32-bit single-core processor running at up to 160MHz. It provides 400KB SRAM and 384KB ROM alongside 4MB onboard Flash memory. Buyers who need more processing cores or larger memory capacity should consider other platforms.

Low-power operation with USB Type-C

The SoC supports flexible clock and independent power-supply controls to achieve low power consumption across different scenarios. An onboard ceramic antenna handles 2.4GHz Wi-Fi 802.11 b/g/n and Bluetooth 5 LE. A USB Type-C port provides the serial interface and power during development.

Helstu kostir

  • RISC-V 32-bit single-core processor at 160MHz enables fast edge computing
  • 4GHz Wi-Fi 802.11 b/g/n plus Bluetooth 5 gives wireless connectivity
  • 400KB SRAM and 384KB ROM with 4MB Flash provides ample memory
  • 15 GPIO pins with 3 SPI, I2C, 2 UART, I2S, 2 ADC allow flexible I/O
  • USB Type-C with integrated serial controller simplifies programming and power

Tæknilýsing

BrandLORDWORLD

Spurningar um þessa vöru

How does the 160 MHz RISC-V processor perform in a real project?

The 32-bit single core running at up to 160 MHz handles typical IoT sensor tasks and protocol stacks with the 400 KB SRAM and 4 MB flash provided.

What does the 2.4 GHz 802.11 b/g/n Wi-Fi and Bluetooth 5 connection actually deliver?

The board provides 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 LE through its onboard ceramic antenna for wireless communication.

What do I need to mount or connect the 15 GPIO pins and castellated edges?

The board comes with pre-soldered headers for the 15 GPIO pins and castellated edges that allow direct soldering to a carrier board.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.