Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Small rectangular USB 2.0 camera module with auto-focus lens

LORDWORLD

LORDWORLD OV5693 5MP USB 2.0 Camera Auto Focus 1080p@30

SKU CH-YCY1-TF02G

A 5 MP USB 2.0 camera with OV5693 sensor, auto focus and 1080p at 30 fps for Raspberry Pi 5 and Jetson Nano

  • 5MP OV5693 sensor captures detailed still images
  • USB 2.0 interface connects directly to Raspberry Pi 5
  • Auto focusing keeps subjects sharp without manual adjustment
  • Records 1080p video at 30 fps for Jetson Nano projects

5 MP USB 2.0 camera for Pi 5 and Jetson Nano

This LORDWORLD module uses the OV5693 sensor to deliver 5 megapixel stills and 1080p video at 30 frames per second. It connects through a standard USB 2.0 port and is designed for Raspberry Pi 5 and Jetson Nano development boards. Auto-focusing simplifies setup for machine-vision and streaming projects.

Low heat and silent operation over USB power

The camera draws its supply directly from the host board, adding minimal load and producing no audible noise. Passive cooling is sufficient because the sensor and logic run cool during continuous 1080p@30 capture. No external power adapter or active fan is required for normal use.

Helstu kostir

  • 5MP OV5693 sensor captures detailed still images
  • USB 2.0 interface connects directly to Raspberry Pi 5
  • Auto focusing keeps subjects sharp without manual adjustment
  • Records 1080p video at 30 fps for Jetson Nano projects

Tæknilýsing

BrandLORDWORLD

Spurningar um þessa vöru

How do I install the OV5693 5MP USB camera on a Raspberry Pi 5 and what step do people often miss?

Plug the module into a USB 2.0 port on the Raspberry Pi 5; the step people miss is enabling the camera interface in raspi-config before testing.

What maintenance or replacement will the OV5693 5MP USB camera need later?

The fixed lens has no moving parts to service; only the USB 2.0 cable or connector may wear and need replacement over time.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.