Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Small rectangular USB 2.0 camera module with auto-focus lens

LORDWORLD

LORDWORLD OV5693 5MP USB 2.0 Camera Auto Focus 1080p@30

SKU CH-YCY1-TF02G

A 5 MP USB 2.0 camera with OV5693 sensor, auto focus and 1080p at 30 fps for Raspberry Pi 5 and Jetson Nano

  • 5MP OV5693 sensor captures detailed still images
  • USB 2.0 interface connects directly to Raspberry Pi 5
  • Auto focusing keeps subjects sharp without manual adjustment
  • Records 1080p video at 30 fps for Jetson Nano projects

5 MP USB 2.0 camera for Pi 5 and Jetson Nano

This LORDWORLD module uses the OV5693 sensor to deliver 5 megapixel stills and 1080p video at 30 frames per second. It connects through a standard USB 2.0 port and is designed for Raspberry Pi 5 and Jetson Nano development boards. Auto-focusing simplifies setup for machine-vision and streaming projects.

Low heat and silent operation over USB power

The camera draws its supply directly from the host board, adding minimal load and producing no audible noise. Passive cooling is sufficient because the sensor and logic run cool during continuous 1080p@30 capture. No external power adapter or active fan is required for normal use.

Points forts

  • 5MP OV5693 sensor captures detailed still images
  • USB 2.0 interface connects directly to Raspberry Pi 5
  • Auto focusing keeps subjects sharp without manual adjustment
  • Records 1080p video at 30 fps for Jetson Nano projects

Caractéristiques

BrandLORDWORLD

Questions sur cet article

How do I install the OV5693 5MP USB camera on a Raspberry Pi 5 and what step do people often miss?

Plug the module into a USB 2.0 port on the Raspberry Pi 5; the step people miss is enabling the camera interface in raspi-config before testing.

What maintenance or replacement will the OV5693 5MP USB camera need later?

The fixed lens has no moving parts to service; only the USB 2.0 cable or connector may wear and need replacement over time.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.