Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green rectangular circuit board with stacked header pins, black battery connector, and surface-mount components

LORDWORLD

LORDWORLD UPS Module HAT for Raspberry Pi Pico Series

SKU CH-1VRQ-Y1BY8

Stackable UPS HAT with Li-Po battery and I2C monitoring for Raspberry Pi Pico series boards

  • Standard Pico header fits all Raspberry Pi Pico series boards
  • Li-Po switching charger with dynamic power path delivers stable uninterrupted supply
  • I2C bus reports voltage, current, power and remaining capacity in real time
  • Multiple protection circuits guard against over-charge, over-discharge, over-current, short circuit and reverse polarity
  • On-board charging and power LEDs give instant battery status visibility

UPS HAT for Raspberry Pi Pico Series

This uninterruptible power supply HAT mounts directly onto the standard Raspberry Pi Pico header, adding a Li-Po battery and switching charger with dynamic power path management. It communicates over I2C so your code can read battery voltage, current, power and remaining capacity in real time. Multiple protection circuits guard against over-charge, over-discharge, over-current, short circuit and reverse polarity.

Makers needing battery-backed Pico projects

Developers building portable sensors, data loggers or robotics that must survive brief power loss will benefit from the onboard charger, status LEDs and I2C telemetry. Builds that require primary cells, higher current output or a different form factor should consider other power solutions.

Standard Pico header with I2C battery monitoring

The board uses the exact Pico pinout for stackable installation and exposes battery health data through an I2C register map, letting firmware decide when to shut down safely or alert the user.

Helstu kostir

  • Standard Pico header fits all Raspberry Pi Pico series boards
  • Li-Po switching charger with dynamic power path delivers stable uninterrupted supply
  • I2C bus reports voltage, current, power and remaining capacity in real time
  • Multiple protection circuits guard against over-charge, over-discharge, over-current, short circuit and reverse polarity
  • On-board charging and power LEDs give instant battery status visibility

Tæknilýsing

BrandLORDWORLD

Spurningar um þessa vöru

What does the I2C bus on this UPS HAT let me monitor in real time?

The I2C bus reports battery voltage, current, power draw and remaining capacity so your Pico can log or react to power status without extra sensors.

Which Raspberry Pi boards does the standard Pico header on this HAT fit?

It matches the pinout of every Raspberry Pi Pico series board, letting you stack the HAT directly on a Pico, Pico W or Pico H without adapters.

How is the Li-Po battery connected and what common mistake should I avoid?

Plug a compatible Li-Po pack into the onboard JST connector; the charger handles dynamic power-path switching, but reversing the polarity will trigger the protection circuit and cut power.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.