Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular circuit board with stacked header pins, black battery connector, and surface-mount components

LORDWORLD

LORDWORLD UPS Module HAT for Raspberry Pi Pico Series

SKU CH-1VRQ-Y1BY8

Stackable UPS HAT with Li-Po battery and I2C monitoring for Raspberry Pi Pico series boards

  • Standard Pico header fits all Raspberry Pi Pico series boards
  • Li-Po switching charger with dynamic power path delivers stable uninterrupted supply
  • I2C bus reports voltage, current, power and remaining capacity in real time
  • Multiple protection circuits guard against over-charge, over-discharge, over-current, short circuit and reverse polarity
  • On-board charging and power LEDs give instant battery status visibility

UPS HAT for Raspberry Pi Pico Series

This uninterruptible power supply HAT mounts directly onto the standard Raspberry Pi Pico header, adding a Li-Po battery and switching charger with dynamic power path management. It communicates over I2C so your code can read battery voltage, current, power and remaining capacity in real time. Multiple protection circuits guard against over-charge, over-discharge, over-current, short circuit and reverse polarity.

Makers needing battery-backed Pico projects

Developers building portable sensors, data loggers or robotics that must survive brief power loss will benefit from the onboard charger, status LEDs and I2C telemetry. Builds that require primary cells, higher current output or a different form factor should consider other power solutions.

Standard Pico header with I2C battery monitoring

The board uses the exact Pico pinout for stackable installation and exposes battery health data through an I2C register map, letting firmware decide when to shut down safely or alert the user.

Pluspunten

  • Standard Pico header fits all Raspberry Pi Pico series boards
  • Li-Po switching charger with dynamic power path delivers stable uninterrupted supply
  • I2C bus reports voltage, current, power and remaining capacity in real time
  • Multiple protection circuits guard against over-charge, over-discharge, over-current, short circuit and reverse polarity
  • On-board charging and power LEDs give instant battery status visibility

Specificaties

BrandLORDWORLD

Vragen over dit artikel

What does the I2C bus on this UPS HAT let me monitor in real time?

The I2C bus reports battery voltage, current, power draw and remaining capacity so your Pico can log or react to power status without extra sensors.

Which Raspberry Pi boards does the standard Pico header on this HAT fit?

It matches the pinout of every Raspberry Pi Pico series board, letting you stack the HAT directly on a Pico, Pico W or Pico H without adapters.

How is the Li-Po battery connected and what common mistake should I avoid?

Plug a compatible Li-Po pack into the onboard JST connector; the charger handles dynamic power-path switching, but reversing the polarity will trigger the protection circuit and cut power.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.