Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

MAIWO

MAIWO K25272C Dual Bay 2.5" SATA RAID Enclosure USB3.1 Gen2

SKU CH-DJ5S-NHNF3

Dual-bay 2.5" SATA enclosure with USB 3.1 Gen2, hardware RAID 0/1, 10 Gbps speed and aluminium cooling for two drives up to 12 TB total

  • ColorBlack
  • TypeEnclosure
  • MaterialAluminum
  • External InterfaceUSB3.1 Gen2
  • HDD Count SupportedDual HDD
  • Number of Bay2

Material Aluminum

External Interface USB3.1 Gen2

Model RAID Enclosure

  • Dual 2.5″ SATA bays accept drives up to 6 TB each
  • RAID 0, 1, Large and Normal modes protect or combine data
  • USB 3.1 Gen 2 interface delivers up to 10 Gbps transfer speed
  • Aluminium alloy shell with 2.0 mm thickness dissipates heat effectively
  • Includes both USB-C to USB-C and USB-C to USB-A cables

Dual-Bay 2.5" SATA RAID Enclosure

The MAIWO K25272C accepts two 2.5-inch SATA hard drives or SSDs up to 9.5 mm thick and presents them over a single USB 3.1 Gen 2 link. Hardware RAID modes 0, 1, Large and Normal are selectable by a physical switch on the chassis. The aluminium shell acts as a heatsink and an automatic sleep mode spins the drives down after ten minutes of inactivity.

Before Ordering

Verify that each drive is a 2.5-inch SATA model no thicker than 9.5 mm; 3.5-inch drives and IDE units are not supported. The host must provide a USB Type-C or Type-A port running at USB 3.1 Gen 2, 3.0, 2.0 or 1.1 speeds. An operating system capable of recognising hardware RAID volumes — Windows XP through 10, Linux or macOS — is required to access the configured array.

Build Integration

A USB-C-to-C cable and a USB-C-to-A cable are included so the enclosure connects to modern or legacy ports without an adapter. The optional DC power input supplies extra current when two high-capacity drives are installed, ensuring stable transfers. Because the RAID logic lives inside the enclosure, the host sees a single volume, freeing drive bays and SATA ports inside the computer for other storage.

Helstu kostir

  • Dual 2.5″ SATA bays accept drives up to 6 TB each
  • RAID 0, 1, Large and Normal modes protect or combine data
  • USB 3.1 Gen 2 interface delivers up to 10 Gbps transfer speed
  • Aluminium alloy shell with 2.0 mm thickness dissipates heat effectively
  • Includes both USB-C to USB-C and USB-C to USB-A cables

Tæknilýsing

ColorBlack
TypeEnclosure
MaterialAluminum
External InterfaceUSB3.1 Gen2
HDD Count SupportedDual HDD
Number of Bay2

Aðrar útgáfur af þessari vöru

3 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What comes in the box with the MAIWO K25272C and do I need to buy drives separately?

The enclosure ships with a USB-C to USB-C cable and a USB-C to USB-A cable; two 2.5-inch SATA HDDs or SSDs must be purchased separately.

Which RAID mode should I choose on the MAIWO K25272C for speed versus redundancy?

RAID 0 stripes data across both drives for maximum throughput, RAID 1 mirrors for redundancy, Large spans them as one volume, and Normal treats them as independent disks.

What does the 10 Gbps USB 3.1 Gen 2 rating mean for real-world file transfers on the MAIWO K25272C?

The 10 Gbps interface supports UASP and is backward compatible with USB 3.0, 2.0 and 1.1; actual throughput depends on the installed SATA drives and host controller.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.