Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver aluminium rectangular power supply unit with terminal connectors on one side

myVolts

myVolts S-60-24 24V 2.5A 60W AT power supply

SKU CH-NM3G-FEH4Z

An AT-type 24 V 2.5 A 60 W switch-mode supply with short-circuit, overload and over-voltage protection, aluminium-alloy housing and CCC, FCC, CE compliance

  • TypeAT
  • High efficiency and low DC ripple deliver stable 24 V output
  • circuit, overload and over-voltage protection safeguards connected equipment
  • Aluminium alloy enclosure enables fan-less cooling for silent operation
  • 100 % full-load burn-in test confirms reliable 60 W performance
  • Wide AC 100–240 V input suits global industrial and automation use

60 W AT Power Supply for Industrial

The myVolts S-60-24 delivers a regulated 24 V output at up to 2.5 A from a 100–240 V AC input. Its aluminium alloy chassis relies on natural convection cooling. The unit suits industrial automation, LED installations, CCTV systems and computer engineering projects that require a compact AT-type source.

Circuit, Overload and Overvoltage Protection

Built-in safeguards disconnect the output during fault conditions, preventing damage to connected equipment. A 100 % burn-in test at full load verifies reliability before shipment. The adjustable voltage trim (+ V / ADJ) allows fine-tuning of the 24 V rail for sensitive loads.

0–40 °C Operating Range with Passive Cooling

The supply is rated for continuous operation between 0 and 40 °C in non-condensing humidity up to 95 %. Without forced airflow, adequate ventilation around the 85 × 58 × 33 mm enclosure is essential. Storage temperatures from –20 to 60 °C are supported when the unit is not powered.

Helstu kostir

  • High efficiency and low DC ripple deliver stable 24 V output
  • circuit, overload and over-voltage protection safeguards connected equipment
  • Aluminium alloy enclosure enables fan-less cooling for silent operation
  • 100 % full-load burn-in test confirms reliable 60 W performance
  • Wide AC 100–240 V input suits global industrial and automation use

Tæknilýsing

TypeAT

Spurningar um þessa vöru

Does the myVolts S-60-24 have a fan that will need cleaning or replacing later?

The unit uses natural convection cooling with no moving parts, so there is no fan to maintain or replace.

What limits continuous operation at the full 2.5 A output?

The supply is rated for 0–40 °C ambient; sustained loads near 60 W at the top of that range will hit the thermal limit first.

How much heat and noise should I expect when the supply runs all day at 60 W?

Natural convection means silent operation; the aluminium case will become warm but stays within the specified 0–40 °C working envelope.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.