Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver aluminium rectangular power supply unit with terminal connectors on one side

myVolts

myVolts S-60-24 24V 2.5A 60W AT power supply

SKU CH-NM3G-FEH4Z

An AT-type 24 V 2.5 A 60 W switch-mode supply with short-circuit, overload and over-voltage protection, aluminium-alloy housing and CCC, FCC, CE compliance

  • TypeAT
  • High efficiency and low DC ripple deliver stable 24 V output
  • circuit, overload and over-voltage protection safeguards connected equipment
  • Aluminium alloy enclosure enables fan-less cooling for silent operation
  • 100 % full-load burn-in test confirms reliable 60 W performance
  • Wide AC 100–240 V input suits global industrial and automation use

60 W AT Power Supply for Industrial

The myVolts S-60-24 delivers a regulated 24 V output at up to 2.5 A from a 100–240 V AC input. Its aluminium alloy chassis relies on natural convection cooling. The unit suits industrial automation, LED installations, CCTV systems and computer engineering projects that require a compact AT-type source.

Circuit, Overload and Overvoltage Protection

Built-in safeguards disconnect the output during fault conditions, preventing damage to connected equipment. A 100 % burn-in test at full load verifies reliability before shipment. The adjustable voltage trim (+ V / ADJ) allows fine-tuning of the 24 V rail for sensitive loads.

0–40 °C Operating Range with Passive Cooling

The supply is rated for continuous operation between 0 and 40 °C in non-condensing humidity up to 95 %. Without forced airflow, adequate ventilation around the 85 × 58 × 33 mm enclosure is essential. Storage temperatures from –20 to 60 °C are supported when the unit is not powered.

Kohokohdat

  • High efficiency and low DC ripple deliver stable 24 V output
  • circuit, overload and over-voltage protection safeguards connected equipment
  • Aluminium alloy enclosure enables fan-less cooling for silent operation
  • 100 % full-load burn-in test confirms reliable 60 W performance
  • Wide AC 100–240 V input suits global industrial and automation use

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

Does the myVolts S-60-24 have a fan that will need cleaning or replacing later?

The unit uses natural convection cooling with no moving parts, so there is no fan to maintain or replace.

What limits continuous operation at the full 2.5 A output?

The supply is rated for 0–40 °C ambient; sustained loads near 60 W at the top of that range will hit the thermal limit first.

How much heat and noise should I expect when the supply runs all day at 60 W?

Natural convection means silent operation; the aluminium case will become warm but stays within the specified 0–40 °C working envelope.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.