Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular silver metal enclosure with screw terminals and voltage selector switch

myVolts

myVolts XC-180-12 power supply 12V 15A 180W

SKU CH-1GSG-ZH2SF MPN XC-180-12

Converts AC 110V or 220V to DC 12V 15A with short-circuit, overload, over-voltage and over-temperature protection in a metal enclosure

  • TypeAT
  • Converts AC 110V or 220V to stable DC 12V
  • Delivers 15 A continuous current for demanding loads
  • Built-in short-circuit, overload, over-voltage and over-temperature protection
  • Compact 200 mm × 98 mm × 42 mm metal enclosure weighs 536 g
  • FCC, CE and RoHS certified for safety compliance

Industrial 12 V 180 W supply

The myVolts XC-180-12 converts AC 110 V or 220 V mains to a regulated DC 12 V output rated at 15 A and 180 W. It is built for engineers, installers and hobbyists who need a rugged switched-mode unit for LED strips, CCTV, automation rigs or test-bench loads.

Thermal and protection profile

A metal enclosure with aluminium base dissipates heat passively across a 0 °C to 40 °C operating range, while an internal EMI filter keeps conducted noise low. Short-circuit, overload, over-voltage and over-temperature circuits shut the rail down before damage occurs, and the unit has passed 100 % full-load burn-in at the factory.

Mounting and wiring practicalities

The 200 mm × 98 mm × 42 mm case offers four screw holes for panel or DIN-rail attachment, and the terminal block provides duplicated +V and COM poles plus an ADJ trimmer for ±5 % voltage adjustment. A side-mounted 110 V/220 V selector must be set to match local mains before power-up.

Helstu kostir

  • Converts AC 110V or 220V to stable DC 12V
  • Delivers 15 A continuous current for demanding loads
  • Built-in short-circuit, overload, over-voltage and over-temperature protection
  • Compact 200 mm × 98 mm × 42 mm metal enclosure weighs 536 g
  • FCC, CE and RoHS certified for safety compliance

Tæknilýsing

TypeAT

Spurningar um þessa vöru

How do I install the XC-180-12 and which wiring step is most often missed?

Connect L and N to AC mains, set the side selector to 110V/115V or 220V/230V before powering on, then wire COM and +V for DC output; the step most often missed is verifying the selector position matches the local mains voltage.

What maintenance or replacement will the XC-180-12 need over time?

Keep the metal enclosure vents clear of dust and ensure the operating temperature stays within 0 to 40°C; the internal fan is not user-serviceable, so the entire unit is replaced if protection circuits trip repeatedly or output voltage drifts beyond the 5% adjustment range.

What limit appears first when the XC-180-12 runs continuously at full load?

The 120W continuous output power rating is reached before the 180W peak figure; sustained operation at 15A requires ambient temperatures below 40°C and unrestricted airflow around the 200×98×42mm aluminium base.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.