Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black metal centrifugal fan with curved plastic impeller, 225 mm diameter, 99 mm deep

NDLIULEI

NDLIULEI No.R2E225-RA92-09 230V 210W 225mm case fan

SKU CH-SA6F-294XV MPN No.R2E225-RA92-09

A 225 mm backward-curved centrifugal fan delivering 705 m³/h airflow at 230 VAC with ball-bearing motor and IP44 protection

  • TypeCase Fan
  • High airflow of 705 m³/h for effective cooling
  • Ball-bearing motor rated for 2500/2600 RPM reliability
  • IP44 protection resists dust and water splashes
  • Operates from -25 °C to 70 °C in harsh environments
  • Backward-curved PA6 impeller delivers efficient 230 V AC performance

Ebmpapst Centrifugal Fan for 230 V Systems

The NDLIULEI No.R2E225-RA92-09 is an original Ebmpapst backward-curved impeller fan built for 230 VAC mains operation. It delivers 705 m³/h airflow at 2500 to 2600 RPM while drawing 155 to 210 W. The IP44-rated motor with ball bearings operates from -25 °C to 70 °C.

Suited for Industrial Air Purifiers

This unit fits machines that accept a 225 mm centrifugal fan with 230 V supply and can accommodate its 99 mm depth and 2.75 kg weight. Buyers who need low-voltage DC control, standard PC case mounting holes or a slimmer profile should look elsewhere.

230 VAC Nominal Voltage Decides Compatibility

The fan runs directly on 50 or 60 Hz mains power at 230 VAC with a current draw of 0.68 to 0.92 A. No onboard PWM or voltage regulation is provided, so the installer must supply the correct mains voltage and protection.

Helstu kostir

  • High airflow of 705 m³/h for effective cooling
  • Ball-bearing motor rated for 2500/2600 RPM reliability
  • IP44 protection resists dust and water splashes
  • Operates from -25 °C to 70 °C in harsh environments
  • Backward-curved PA6 impeller delivers efficient 230 V AC performance

Tæknilýsing

TypeCase Fan

Spurningar um þessa vöru

How loud is the 2500/2600 RPM centrifugal fan during continuous operation?

The unit runs at 2500 RPM on 50 Hz and 2600 RPM on 60 Hz with a backward-curved impeller; ebm-papst does not publish a decibel rating for this model.

What mains wiring and mounting provisions are required to install the 230 VAC 210 W motor?

A 230 VAC supply capable of 0.92 A at 60 Hz, a grounded connection, and a 225 × 99 mm cut-out with four mounting holes for the 2.75 kg frame.

Will the 705 m³/h airflow and IP44 rating work with older filter housings designed for axial fans?

The centrifugal design delivers 705 m³/h through a 225 mm inlet; IP44 protects against splashes, but mounting pattern and pressure curve differ from typical axial units.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.