Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Twelve green DDR5 RDIMM modules in a row, no heat spreaders

NEMIX RAM

NEMIX RAM 1.5TB 12x128GB DDR5 5600 ECC Registered RDIMM Supermicro H14SHM memory upgrade

SKU CH-QJNN-ZK230

A 1.5 TB kit of twelve 128 GB DDR5 5600 ECC registered RDIMMs validated for the Supermicro H14SHM motherboard

  • Capacity1.5TB (12 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 1.5TB 12X128GB

Sjá 24 stillingar til viðbótar
  • 5TB capacity with 12 x 128GB DDR5 5600 modules for maximum server memory density
  • ECC and registered design corrects single-bit errors and offloads the memory controller for stable full-population operation
  • CL46 latency at 1.10V delivers rated DDR5-5600 performance with low power draw
  • 288-pin RDIMM form factor matches Supermicro H14SHM slot and population requirements exactly
  • Major OEM Samsung, Micron or Hynix DRAM chips ensure enterprise-grade component quality

Exact-fit DDR5 kit for Supermicro H14SHM

This 1.5 TB kit contains twelve 128 GB DDR5-5600 registered ECC RDIMMs built to the Supermicro H14SHM motherboard's qualified-vendor list. The 288‑pin modules operate at 1.1 V with CL46 latency and a 2Rx4 rank structure, so the memory controller recognises every slot at full capacity without manual tuning. It is intended for administrators who need the precise part-number match rather than a generic server DIMM.

Registered buffer and ECC under full population

Because each module is registered, the memory controller sees only one electrical load per slot even with all twelve DIMMs installed, allowing sustained throughput at the rated 5600 MT/s without signal degradation. On-die ECC corrects single-bit errors in real time, preventing silent data corruption during long compute runs or virtualised workloads. The 1.1 V operating voltage keeps power draw predictable across the fully populated chassis.

Twelve-module 1.5 TB capacity gate

The kit delivers exactly 1.5 TB only when all twelve 128 GB RDIMMs are populated; any empty slot reduces total capacity proportionally and may change the supported memory-channel topology. Buyers who need a smaller footprint or a different rank configuration should verify the motherboard's population rules before ordering.

Helstu kostir

  • 5TB capacity with 12 x 128GB DDR5 5600 modules for maximum server memory density
  • ECC and registered design corrects single-bit errors and offloads the memory controller for stable full-population operation
  • CL46 latency at 1.10V delivers rated DDR5-5600 performance with low power draw
  • 288-pin RDIMM form factor matches Supermicro H14SHM slot and population requirements exactly
  • Major OEM Samsung, Micron or Hynix DRAM chips ensure enterprise-grade component quality

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K12
Capacity1.5TB (12 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 12X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How much power does the 1.5 TB kit draw when the server runs continuously?

Each 128 GB module operates at 1.10 V; the DDR5 standard moves voltage regulation onto the DIMM, so total draw depends on how many of the 12 slots the H14SHM populates and the workload intensity.

What must the motherboard provide for these 288-pin RDIMMs to function?

The Supermicro H14SHM must support DDR5 Registered ECC memory, accept 2Rx4 modules at 5600 MT/s, and follow its documented population rules for up to 1.5 TB.

Will these 5600 CL46 2Rx4 registered DIMMs run at rated speed beside slower DDR5 modules already installed?

The memory controller will clock all populated slots to the lowest common speed and latency; mixing ranks or timings can prevent the kit from reaching 5600 MT/s CL46.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.