Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Twelve green DDR5 RDIMM modules in a row, no heat spreaders

NEMIX RAM

NEMIX RAM 1.5TB 12x128GB DDR5 5600 ECC Registered RDIMM Supermicro H14SHM memory upgrade

SKU CH-QJNN-ZK230

A 1.5 TB kit of twelve 128 GB DDR5 5600 ECC registered RDIMMs validated for the Supermicro H14SHM motherboard

  • Capacity1.5TB (12 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 1.5TB 12X128GB

Pokaż jeszcze 24 konfiguracji
  • 5TB capacity with 12 x 128GB DDR5 5600 modules for maximum server memory density
  • ECC and registered design corrects single-bit errors and offloads the memory controller for stable full-population operation
  • CL46 latency at 1.10V delivers rated DDR5-5600 performance with low power draw
  • 288-pin RDIMM form factor matches Supermicro H14SHM slot and population requirements exactly
  • Major OEM Samsung, Micron or Hynix DRAM chips ensure enterprise-grade component quality

Exact-fit DDR5 kit for Supermicro H14SHM

This 1.5 TB kit contains twelve 128 GB DDR5-5600 registered ECC RDIMMs built to the Supermicro H14SHM motherboard's qualified-vendor list. The 288‑pin modules operate at 1.1 V with CL46 latency and a 2Rx4 rank structure, so the memory controller recognises every slot at full capacity without manual tuning. It is intended for administrators who need the precise part-number match rather than a generic server DIMM.

Registered buffer and ECC under full population

Because each module is registered, the memory controller sees only one electrical load per slot even with all twelve DIMMs installed, allowing sustained throughput at the rated 5600 MT/s without signal degradation. On-die ECC corrects single-bit errors in real time, preventing silent data corruption during long compute runs or virtualised workloads. The 1.1 V operating voltage keeps power draw predictable across the fully populated chassis.

Twelve-module 1.5 TB capacity gate

The kit delivers exactly 1.5 TB only when all twelve 128 GB RDIMMs are populated; any empty slot reduces total capacity proportionally and may change the supported memory-channel topology. Buyers who need a smaller footprint or a different rank configuration should verify the motherboard's population rules before ordering.

Najważniejsze cechy

  • 5TB capacity with 12 x 128GB DDR5 5600 modules for maximum server memory density
  • ECC and registered design corrects single-bit errors and offloads the memory controller for stable full-population operation
  • CL46 latency at 1.10V delivers rated DDR5-5600 performance with low power draw
  • 288-pin RDIMM form factor matches Supermicro H14SHM slot and population requirements exactly
  • Major OEM Samsung, Micron or Hynix DRAM chips ensure enterprise-grade component quality

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K12
Capacity1.5TB (12 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 12X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

How much power does the 1.5 TB kit draw when the server runs continuously?

Each 128 GB module operates at 1.10 V; the DDR5 standard moves voltage regulation onto the DIMM, so total draw depends on how many of the 12 slots the H14SHM populates and the workload intensity.

What must the motherboard provide for these 288-pin RDIMMs to function?

The Supermicro H14SHM must support DDR5 Registered ECC memory, accept 2Rx4 modules at 5600 MT/s, and follow its documented population rules for up to 1.5 TB.

Will these 5600 CL46 2Rx4 registered DIMMs run at rated speed beside slower DDR5 modules already installed?

The memory controller will clock all populated slots to the lowest common speed and latency; mixing ranks or timings can prevent the kit from reaching 5600 MT/s CL46.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.