Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4-2933 ECC UDIMM CL21 1.2V 1Rx8 memory upgrade

SKU CH-AP8D-V2T0M

16 GB DDR4-2933 ECC UDIMM kit (2×8 GB, CL21, 1.2 V) validated for Supermicro X12SAE and X12SCA-F motherboards

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Size 16GB 2X8GB

  • ECC corrects single-bit errors automatically preventing silent data corruption
  • Exact DDR4-2933 CL21 1.20V timing matches Supermicro X12SAE memory controller
  • 288-pin UDIMM form factor fits board slots not RDIMM or SODIMM
  • 16GB 2x8GB 1Rx8 kit installs at full rated capacity and speed
  • Major Samsung Micron Hynix chips deliver enterprise-grade reliability

ECC UDIMM kit for Supermicro X12SAE/X12SCA-F

This 16 GB kit uses two 8 GB DDR4-2933 ECC UDIMM modules built to the exact rank, voltage and timing the Supermicro X12SAE and X12SCA-F memory controller expects. The 288-pin unbuffered form factor matches the board slots and the CL21 1.2 V specification ensures the modules are recognised at full capacity and rated speed.

Ideal for ECC server builds.

Builders upgrading a Supermicro X12SAE or X12SCA-F platform gain single-bit error correction that prevents silent data corruption and unplanned reboots. The kit will not function in systems that require registered DIMMs, SODIMMs or non-ECC memory, and it cannot serve platforms limited to lower DDR4 speeds.

1Rx8 unbuffered ECC at CL21 1.2 V

The single-rank-by-eight organisation and unbuffered ECC design are the decisive specifications; if the motherboard manual calls for 1Rx8 UDIMM ECC at CL21 and 1.2 V, this kit meets that requirement exactly.

Helstu kostir

  • ECC corrects single-bit errors automatically preventing silent data corruption
  • Exact DDR4-2933 CL21 1.20V timing matches Supermicro X12SAE memory controller
  • 288-pin UDIMM form factor fits board slots not RDIMM or SODIMM
  • 16GB 2x8GB 1Rx8 kit installs at full rated capacity and speed
  • Major Samsung Micron Hynix chips deliver enterprise-grade reliability

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME23400-818K2
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB 2X8GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN ECC UDIMM KIT

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How can I verify the kit runs at DDR4-2933 CL21 after installing it in my Supermicro X12SAE?

Enter the BIOS and confirm the memory frequency shows 2933 MT/s with CAS latency 21; the ECC UDIMM modules are spec-matched to the board so they should be recognised at full rated speed without manual tuning.

What does the ME23400-818K2 package contain and is anything else required?

The box includes two 8 GB 288-pin DDR4 ECC UDIMM modules for a total of 16 GB; no heat spreaders or extra cables are included and nothing else is needed for installation.

Should I choose the 1Rx8 16 GB kit or a different capacity for my X12SCA-F build?

This 16 GB (2 x 8 GB) 1Rx8 kit matches the motherboard's validated population rules; select it when your workload fits within 16 GB and you want the exact rank and voltage the board expects.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.