저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Two green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4-2933 ECC UDIMM CL21 1.2V 1Rx8 memory upgrade

SKU CH-AP8D-V2T0M

16 GB DDR4-2933 ECC UDIMM kit (2×8 GB, CL21, 1.2 V) validated for Supermicro X12SAE and X12SCA-F motherboards

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Size 16GB 2X8GB

  • ECC corrects single-bit errors automatically preventing silent data corruption
  • Exact DDR4-2933 CL21 1.20V timing matches Supermicro X12SAE memory controller
  • 288-pin UDIMM form factor fits board slots not RDIMM or SODIMM
  • 16GB 2x8GB 1Rx8 kit installs at full rated capacity and speed
  • Major Samsung Micron Hynix chips deliver enterprise-grade reliability

ECC UDIMM kit for Supermicro X12SAE/X12SCA-F

This 16 GB kit uses two 8 GB DDR4-2933 ECC UDIMM modules built to the exact rank, voltage and timing the Supermicro X12SAE and X12SCA-F memory controller expects. The 288-pin unbuffered form factor matches the board slots and the CL21 1.2 V specification ensures the modules are recognised at full capacity and rated speed.

Ideal for ECC server builds.

Builders upgrading a Supermicro X12SAE or X12SCA-F platform gain single-bit error correction that prevents silent data corruption and unplanned reboots. The kit will not function in systems that require registered DIMMs, SODIMMs or non-ECC memory, and it cannot serve platforms limited to lower DDR4 speeds.

1Rx8 unbuffered ECC at CL21 1.2 V

The single-rank-by-eight organisation and unbuffered ECC design are the decisive specifications; if the motherboard manual calls for 1Rx8 UDIMM ECC at CL21 and 1.2 V, this kit meets that requirement exactly.

주요 특징

  • ECC corrects single-bit errors automatically preventing silent data corruption
  • Exact DDR4-2933 CL21 1.20V timing matches Supermicro X12SAE memory controller
  • 288-pin UDIMM form factor fits board slots not RDIMM or SODIMM
  • 16GB 2x8GB 1Rx8 kit installs at full rated capacity and speed
  • Major Samsung Micron Hynix chips deliver enterprise-grade reliability

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME23400-818K2
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB 2X8GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN ECC UDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How can I verify the kit runs at DDR4-2933 CL21 after installing it in my Supermicro X12SAE?

Enter the BIOS and confirm the memory frequency shows 2933 MT/s with CAS latency 21; the ECC UDIMM modules are spec-matched to the board so they should be recognised at full rated speed without manual tuning.

What does the ME23400-818K2 package contain and is anything else required?

The box includes two 8 GB 288-pin DDR4 ECC UDIMM modules for a total of 16 GB; no heat spreaders or extra cables are included and nothing else is needed for installation.

Should I choose the 1Rx8 16 GB kit or a different capacity for my X12SCA-F build?

This 16 GB (2 x 8 GB) 1Rx8 kit matches the motherboard's validated population rules; select it when your workload fits within 16 GB and you want the exact rank and voltage the board expects.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.