Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green circuit boards with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 1.2V 288-pin UDIMM SuperMicro SYS-530AD-I memory upgrade

SKU CH-A9E1-MR1Z3

16 GB DDR4 3200 CL22 dual-channel kit for SuperMicro SYS-530AD-I workstations

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB dual-channel kit doubles usable memory
  • 3200 MT/s DDR4 speed matches platform spec
  • CL22 latency keeps timing stable at load
  • 2 V operation reduces power draw and heat
  • Validated for SuperMicro SYS-530AD-I workstation

SuperMicro SYS-530AD-I memory kit

This 16GB kit contains two 8GB DDR4 UDIMMs validated for the SuperMicro SYS-530AD-I SuperWorkstation. It targets administrators or builders who need a matched pair for that specific platform. The modules are unbuffered, non-ECC and run at the standard 1.20V. Buyers who need registered DIMMs or error-correcting memory should look elsewhere.

DDR4 3200 CL22 specification

The kit operates at DDR4 3200 (PC4-25600) with a CAS latency of CL22. Each module is a single-rank 1Rx8 design built from major OEM Samsung, Micron or Hynix chips. The 288-pin form factor fits standard desktop UDIMM slots on the validated SuperMicro board. Systems that require a different speed grade or lower latency will not match this kit.

Thermals and power draw

Modules have no heat spreaders and draw 1.20V at the JEDEC standard voltage. Passive cooling relies on chassis airflow across the bare PCB. Power consumption stays within normal DDR4 limits for 3200 MT/s operation. No active cooling or extra voltage headroom is required.

Helstu kostir

  • 16 GB dual-channel kit doubles usable memory
  • 3200 MT/s DDR4 speed matches platform spec
  • CL22 latency keeps timing stable at load
  • 2 V operation reduces power draw and heat
  • Validated for SuperMicro SYS-530AD-I workstation

Tæknilýsing

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT

Spurningar um þessa vöru

Will the 3200 MHz speed run at full rate in the SYS-530AD-I?

The kit is rated at DDR4 3200 (PC4-25600). The SuperMicro SYS-530AD-I memory controller determines the actual operating frequency; if the platform supports 3200 MT/s the modules will run at that speed, otherwise they down-clock to the highest supported JEDEC setting.

Is this DDR4 UDIMM unbuffered non-ECC, and does the board accept that type?

Yes, each module is a 288-pin DDR4 UDIMM, unbuffered and non-ECC, matching the desktop/workstation memory slots used in the SYS-530AD-I.

Do the two 8 GB sticks fit the standard DIMM slots without a heat spreader?

The modules are plain 288-pin UDIMMs with no heat spreader, so they occupy a single slot each and clear standard CPU coolers in the SYS-530AD-I chassis.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.