BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00278214BTC
Dostępny
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 1.2V 288-pin UDIMM SuperMicro SYS-530AD-I memory upgrade
16 GB DDR4 3200 CL22 dual-channel kit for SuperMicro SYS-530AD-I workstations
- Capacity16GB (2 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB dual-channel kit doubles usable memory
- 3200 MT/s DDR4 speed matches platform spec
- CL22 latency keeps timing stable at load
- 2 V operation reduces power draw and heat
- Validated for SuperMicro SYS-530AD-I workstation
SuperMicro SYS-530AD-I memory kit
This 16GB kit contains two 8GB DDR4 UDIMMs validated for the SuperMicro SYS-530AD-I SuperWorkstation. It targets administrators or builders who need a matched pair for that specific platform. The modules are unbuffered, non-ECC and run at the standard 1.20V. Buyers who need registered DIMMs or error-correcting memory should look elsewhere.
DDR4 3200 CL22 specification
The kit operates at DDR4 3200 (PC4-25600) with a CAS latency of CL22. Each module is a single-rank 1Rx8 design built from major OEM Samsung, Micron or Hynix chips. The 288-pin form factor fits standard desktop UDIMM slots on the validated SuperMicro board. Systems that require a different speed grade or lower latency will not match this kit.
Thermals and power draw
Modules have no heat spreaders and draw 1.20V at the JEDEC standard voltage. Passive cooling relies on chassis airflow across the bare PCB. Power consumption stays within normal DDR4 limits for 3200 MT/s operation. No active cooling or extra voltage headroom is required.
Najważniejsze cechy
- 16 GB dual-channel kit doubles usable memory
- 3200 MT/s DDR4 speed matches platform spec
- CL22 latency keeps timing stable at load
- 2 V operation reduces power draw and heat
- Validated for SuperMicro SYS-530AD-I workstation
Specyfikacja
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
Pytania dotyczące tego produktu
Will the 3200 MHz speed run at full rate in the SYS-530AD-I?
The kit is rated at DDR4 3200 (PC4-25600). The SuperMicro SYS-530AD-I memory controller determines the actual operating frequency; if the platform supports 3200 MT/s the modules will run at that speed, otherwise they down-clock to the highest supported JEDEC setting.
Is this DDR4 UDIMM unbuffered non-ECC, and does the board accept that type?
Yes, each module is a 288-pin DDR4 UDIMM, unbuffered and non-ECC, matching the desktop/workstation memory slots used in the SYS-530AD-I.
Do the two 8 GB sticks fit the standard DIMM slots without a heat spreader?
The modules are plain 288-pin UDIMMs with no heat spreader, so they occupy a single slot each and clear standard CPU coolers in the SYS-530AD-I chassis.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00280802BTC
Dostępny
