Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green SODIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 SODIMM kit for POSIFLEX ZT-3116

SKU CH-VJG7-ACGHQ

16 GB DDR4 3200 CL22 SODIMM kit built for the POSIFLEX ZT-3116 terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB dual-channel kit boosts POS terminal responsiveness
  • DDR4 3200 MT/s matches system memory bus for stable operation
  • CL22 latency and 1.20 V voltage keep power draw low
  • 260-pin SODIMM form factor fits POSIFLEX ZT-3116 slots directly
  • Major OEM Samsung Micron Hynix chips ensure reliable uptime

POSIFLEX ZT-3116 Memory Kit

This 16 GB DDR4 SODIMM kit is built specifically for the POSIFLEX ZT-3116 Haydn ZT series point-of-sale terminal. It contains two 8 GB modules that install directly into the system's 260-pin slots without additional configuration. The memory is validated for the target platform to ensure reliable boot and operation in retail or kiosk environments.

Suitable for POS Terminal Upgrades

The kit suits technicians and resellers who need a drop-in capacity increase for the ZT-3116. It is not intended for laptops, desktops, or other POS models that use different pin counts, voltages, or timing profiles. Buyers who require ECC protection, registered modules, or speeds above 3200 MT/s should look at other product lines.

16 GB Dual-Channel Capacity

The 2 x 8 GB configuration provides 16 GB total capacity running in dual-channel mode at 3200 MT/s with CL22 latency and 1.20 V operation. This headroom handles typical POS workloads such as transaction processing, inventory lookup, and peripheral management. Workloads that demand more than 16 GB or lower latency than CL22 will exceed the kit's design limits.

Helstu kostir

  • 16 GB dual-channel kit boosts POS terminal responsiveness
  • DDR4 3200 MT/s matches system memory bus for stable operation
  • CL22 latency and 1.20 V voltage keep power draw low
  • 260-pin SODIMM form factor fits POSIFLEX ZT-3116 slots directly
  • Major OEM Samsung Micron Hynix chips ensure reliable uptime

Tæknilýsing

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM POS Memory KIT

Spurningar um þessa vöru

What DDR4 SODIMM slots must the POSIFLEX ZT-3116 have free for this 2x8GB kit?

The kit needs two empty 260-pin DDR4 SODIMM slots running at 1.2 V to install both 8 GB modules.

Will the CL22 timing work with slower DDR4 modules already in the terminal?

Yes — the memory controller will drop all modules to the lowest common speed and highest CAS latency, so existing slower DDR4 SODIMMs remain compatible.

How can I confirm the kit is running at 3200 MT/s after installation?

Open Task Manager or a hardware monitor; the memory tab should show 3200 MHz and CL22 for each 8 GB module.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.