BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00279215BTC
มีสินค้า
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 SODIMM kit for POSIFLEX ZT-3116
16 GB DDR4 3200 CL22 SODIMM kit built for the POSIFLEX ZT-3116 terminal
- Capacity16GB (2 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB dual-channel kit boosts POS terminal responsiveness
- DDR4 3200 MT/s matches system memory bus for stable operation
- CL22 latency and 1.20 V voltage keep power draw low
- 260-pin SODIMM form factor fits POSIFLEX ZT-3116 slots directly
- Major OEM Samsung Micron Hynix chips ensure reliable uptime
POSIFLEX ZT-3116 Memory Kit
This 16 GB DDR4 SODIMM kit is built specifically for the POSIFLEX ZT-3116 Haydn ZT series point-of-sale terminal. It contains two 8 GB modules that install directly into the system's 260-pin slots without additional configuration. The memory is validated for the target platform to ensure reliable boot and operation in retail or kiosk environments.
Suitable for POS Terminal Upgrades
The kit suits technicians and resellers who need a drop-in capacity increase for the ZT-3116. It is not intended for laptops, desktops, or other POS models that use different pin counts, voltages, or timing profiles. Buyers who require ECC protection, registered modules, or speeds above 3200 MT/s should look at other product lines.
16 GB Dual-Channel Capacity
The 2 x 8 GB configuration provides 16 GB total capacity running in dual-channel mode at 3200 MT/s with CL22 latency and 1.20 V operation. This headroom handles typical POS workloads such as transaction processing, inventory lookup, and peripheral management. Workloads that demand more than 16 GB or lower latency than CL22 will exceed the kit's design limits.
จุดเด่น
- 16 GB dual-channel kit boosts POS terminal responsiveness
- DDR4 3200 MT/s matches system memory bus for stable operation
- CL22 latency and 1.20 V voltage keep power draw low
- 260-pin SODIMM form factor fits POSIFLEX ZT-3116 slots directly
- Major OEM Samsung Micron Hynix chips ensure reliable uptime
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM POS Memory KIT |
คำถามเกี่ยวกับสินค้านี้
What DDR4 SODIMM slots must the POSIFLEX ZT-3116 have free for this 2x8GB kit?
The kit needs two empty 260-pin DDR4 SODIMM slots running at 1.2 V to install both 8 GB modules.
Will the CL22 timing work with slower DDR4 modules already in the terminal?
Yes — the memory controller will drop all modules to the lowest common speed and highest CAS latency, so existing slower DDR4 SODIMMs remain compatible.
How can I confirm the kit is running at 3200 MT/s after installation?
Open Task Manager or a hardware monitor; the memory tab should show 3200 MHz and CL22 for each 8 GB module.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
