NEMIX RAM
NEMIX RAM 192GB (2x96GB) DDR5 6400 CL52 1.1V ECC RDIMM 2Rx4 SuperMicro AS-2116GT-HNTF memory upgrade
192 GB DDR5 6400 CL52 ECC registered server memory kit, 2×96 GB 2Rx4 modules at 1.1 V for SuperMicro GrandTwin AS-2116GT-HNTF
- Capacity192GB (2 x 96GB)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- Compatible SystemSupermicro
- 192 GB total capacity from two 96 GB modules
- DDR5 6400 MHz speed for high-throughput server workloads
- CL52 CAS latency tuned for registered ECC stability
- 1 V operating voltage reduces power draw per module
- 288-pin RDIMM form factor fits SuperMicro GrandTwin AS-2116GT-HNTF
Compatible Server Memory Kit
This 192GB kit contains two 96GB DDR5 RDIMMs built for the SuperMicro GrandTwin A+ Server AS-2116GT-HNTF. Registered ECC modules with 2Rx4 organisation deliver error correction and signal integrity for multi-socket platforms. The kit operates at 6400MHz with CL52 latency at 1.1V. It installs directly into the server's 288-pin DDR5 slots.
Suited For Enterprise Workloads
Database servers, virtualisation hosts and high-thread-count compute nodes benefit from the 192GB capacity and registered buffer. Workstations or desktops requiring unbuffered UDIMMs cannot use these modules. Builders needing lower density per DIMM or non-ECC memory should select a different kit. The registered design also prevents use in consumer chipsets that lack RDIMM support.
Capacity And Headroom
Two 96GB ranks provide 192GB total, allowing large in-memory datasets and dense VM allocations. The 6400MHz PC5-51200 rating supplies bandwidth for memory-bound tasks. Workloads exceeding 192GB per two-channel population will require additional DIMM slots or higher-density modules not included here. CL52 latency is standard for registered DDR5 at this frequency.
Helstu kostir
- 192 GB total capacity from two 96 GB modules
- DDR5 6400 MHz speed for high-throughput server workloads
- CL52 CAS latency tuned for registered ECC stability
- 1 V operating voltage reduces power draw per module
- 288-pin RDIMM form factor fits SuperMicro GrandTwin AS-2116GT-HNTF
Tæknilýsing
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K2 |
| Capacity | 192GB (2 x 96GB) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL52 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB (2 x 96GB) DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Spurningar um þessa vöru
Does my SuperMicro AS-2116GT-HNTF motherboard need 288-pin DDR5 slots to accept this 192GB kit?
Yes, the kit uses 288-pin DDR5 RDIMM modules, so the board must provide DDR5 RDIMM slots for them to fit and function.
If I keep some existing DDR5 RDIMM modules in the server, will this 6400 CL52 kit run at its rated speed alongside them?
The server will run all installed modules at the lowest common speed and latency, so older modules may pull the kit below 6400 CL52.
After installation, how can I confirm the full 192GB is detected and running at 6400 CL52 with ECC active?
Check the BIOS memory information screen or run a tool such as dmidecode; it should show 192GB total, 6400 MT/s, CL52 timings and ECC enabled.
Einnig í þessum vöruflokki
Fólk bar þetta saman
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.



