NEMIX RAM
NEMIX RAM 192GB (4 x 48GB) DDR5 5600 CL46 1.1V ECC Registered RDIMM memory upgrade for Supermicro H13SSH-E
A 192 GB DDR5-5600 ECC registered RDIMM kit of four 48 GB modules at CL46 and 1.1 V, validated for the Supermicro H13SSH-E motherboard
- Capacity192GB (4 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 192 GB total capacity from four 48 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- CL46 CAS latency at 1.10 V operating voltage
- Registered ECC design with 2Rx8 rank for full-slot stability
- Exact-fit 288-pin RDIMM kit validated for Supermicro H13SSH-E
Exact-match DDR5 kit for Supermicro H13SSH-E
This 192GB kit contains four 48GB DDR5 5600 RDIMMs built to the CL46 1.1V 2Rx8 specification the Supermicro H13SSH-E memory controller expects. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors on the fly.
Suited for capacity-limited servers.
Workloads that need maximum registered ECC capacity in a four-module layout will benefit. Systems that require UDIMMs, SODIMMs, non-ECC memory, or a different DDR generation cannot use these modules.
Fits H13SSH-E DIMM slots; frees controller headroom
The 288-pin RDIMM form factor matches the board's slot keying and population rules. Registered buffering reduces electrical load on the memory controller, allowing full-capacity operation across all populated channels.
Helstu kostir
- 192 GB total capacity from four 48 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- CL46 CAS latency at 1.10 V operating voltage
- Registered ECC design with 2Rx8 rank for full-slot stability
- Exact-fit 288-pin RDIMM kit validated for Supermicro H13SSH-E
Tæknilýsing
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-4828K4 |
| Capacity | 192GB (4 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 4X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Spurningar um þessa vöru
Does the Supermicro H13SSH-E motherboard need to support 288-pin DDR5 RDIMM modules for this kit to work?
Yes, the Supermicro H13SSH-E requires 288-pin DDR5 RDIMM modules and this kit matches that exact form factor and registered architecture.
Can I mix these 48GB 2Rx8 modules with smaller DDR5 RDIMMs already installed in the server?
Mixing different capacities or ranks is not recommended; the board's population rules expect identical modules per channel for stable operation at DDR5 5600.
How can I verify the kit is running at DDR5 5600 with CL46 after installation?
Check the BIOS memory information screen or use a tool like dmidecode to confirm speed shows 5600 MT/s, CAS latency 46, and all 192GB detected.
Einnig í þessum vöruflokki
Fólk bar þetta saman
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.



