Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter

NEMIX RAM

NEMIX RAM 192GB (4 x 48GB) DDR5 5600 CL46 1.1V ECC Registered RDIMM memory upgrade for Supermicro H13SSH-E

SKU CH-8PCZ-429DG

A 192 GB DDR5-5600 ECC registered RDIMM kit of four 48 GB modules at CL46 and 1.1 V, validated for the Supermicro H13SSH-E motherboard

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 192 GB total capacity from four 48 GB modules
  • DDR5 5600 speed rated at PC5-44800 bandwidth
  • CL46 CAS latency at 1.10 V operating voltage
  • Registered ECC design with 2Rx8 rank for full-slot stability
  • Exact-fit 288-pin RDIMM kit validated for Supermicro H13SSH-E

Exact-match DDR5 kit for Supermicro H13SSH-E

This 192GB kit contains four 48GB DDR5 5600 RDIMMs built to the CL46 1.1V 2Rx8 specification the Supermicro H13SSH-E memory controller expects. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors on the fly.

Suited for capacity-limited servers.

Workloads that need maximum registered ECC capacity in a four-module layout will benefit. Systems that require UDIMMs, SODIMMs, non-ECC memory, or a different DDR generation cannot use these modules.

Fits H13SSH-E DIMM slots; frees controller headroom

The 288-pin RDIMM form factor matches the board's slot keying and population rules. Registered buffering reduces electrical load on the memory controller, allowing full-capacity operation across all populated channels.

Points forts

  • 192 GB total capacity from four 48 GB modules
  • DDR5 5600 speed rated at PC5-44800 bandwidth
  • CL46 CAS latency at 1.10 V operating voltage
  • Registered ECC design with 2Rx8 rank for full-slot stability
  • Exact-fit 288-pin RDIMM kit validated for Supermicro H13SSH-E

Caractéristiques

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Questions sur cet article

Does the Supermicro H13SSH-E motherboard need to support 288-pin DDR5 RDIMM modules for this kit to work?

Yes, the Supermicro H13SSH-E requires 288-pin DDR5 RDIMM modules and this kit matches that exact form factor and registered architecture.

Can I mix these 48GB 2Rx8 modules with smaller DDR5 RDIMMs already installed in the server?

Mixing different capacities or ranks is not recommended; the board's population rules expect identical modules per channel for stable operation at DDR5 5600.

How can I verify the kit is running at DDR5 5600 with CL46 after installation?

Check the BIOS memory information screen or use a tool like dmidecode to confirm speed shows 5600 MT/s, CAS latency 46, and all 192GB detected.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.