Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two bare green DDR5 UDIMM sticks, 288-pin, no heat spreader, 32GB kit

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5200 CL42 1.1V desktop RAM

SKU CH-WTVY-G6SVC

32 GB dual-channel DDR5 kit with two 16 GB modules running at 5200 MT/s CL42 and 1.1 V on standard 288-pin UDIMM slots

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5200 (PC5 41600)
  • CAS LatencyCL42
  • Voltage1.10V
  • ECCNo

Capacity 32GB (2 x 16GB)

  • 32 GB total capacity from two 16 GB modules
  • DDR5 5200 speed rated at PC5-41600 bandwidth
  • Low 1.1 V operation reduces power draw
  • CL42 latency for responsive desktop performance
  • 288-pin UDIMM fits standard DDR5 motherboard slots

NEMIX RAM 32GB DDR5 5200 Kit

This kit provides two 16GB DDR5 UDIMM modules running at 5200 MT/s with CL42 latency. It operates at the standard 1.1V voltage and uses a 288-pin unbuffered non-ECC design. The modules are built with major OEM chips from Samsung Micron or Hynix.

Suits DDR5 desktop motherboards needing 32GB

Builders upgrading a compatible desktop or workstation board will find this a straightforward drop-in. Systems requiring ECC registered memory or lower latency timings should look at different module types. The lack of a heat spreader keeps the profile low for tight spaces.

32GB total capacity handles multitasking

Two 16GB sticks leave two slots free on typical four-slot boards for future expansion. The CL42 timing and 5200 speed deliver standard DDR5 bandwidth for office productivity and gaming. Heavy content creation or virtualisation may benefit from higher capacity or tighter latency kits.

Helstu kostir

  • 32 GB total capacity from two 16 GB modules
  • DDR5 5200 speed rated at PC5-41600 bandwidth
  • Low 1.1 V operation reduces power draw
  • CL42 latency for responsive desktop performance
  • 288-pin UDIMM fits standard DDR5 motherboard slots

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM DDR5 Orignial Series 288-Pin Non-ECC Unbuffered UDIMM Desktop PC Memory
ModelOriginal Series DDR5 Desktop PC Memory Solutions
Part NumberMD41600-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5200 (PC5 41600)
CAS LatencyCL42
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard, Desktop, Workstation, Gaming Machine Compatible
LED ColorNone

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What motherboard slot and voltage do I need for this 288-pin 1.10 V DDR5 kit?

The kit uses 288-pin DDR5 UDIMM slots and runs at the standard DDR5 voltage of 1.10 V, so your board must support DDR5 at that voltage.

Can I add this CL42 5200 kit to slower DDR5 modules already in my system?

Yes, the modules will down-clock to match the slowest installed DDR5 speed and tighten to the loosest timings across all populated slots.

How do I confirm both 16 GB sticks are running at 5200 CL42 after install?

Check the memory tab in CPU-Z or the BIOS memory information screen; it should show 5200 MT/s, CL42 and 32 GB total capacity.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.