Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two bare green DDR5 UDIMM sticks, 288-pin, no heat spreader, 32GB kit

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5200 CL42 1.1V desktop RAM

SKU CH-WTVY-G6SVC

32 GB dual-channel DDR5 kit with two 16 GB modules running at 5200 MT/s CL42 and 1.1 V on standard 288-pin UDIMM slots

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5200 (PC5 41600)
  • CAS LatencyCL42
  • Voltage1.10V
  • ECCNo

Capacity 32GB (2 x 16GB)

  • 32 GB total capacity from two 16 GB modules
  • DDR5 5200 speed rated at PC5-41600 bandwidth
  • Low 1.1 V operation reduces power draw
  • CL42 latency for responsive desktop performance
  • 288-pin UDIMM fits standard DDR5 motherboard slots

NEMIX RAM 32GB DDR5 5200 Kit

This kit provides two 16GB DDR5 UDIMM modules running at 5200 MT/s with CL42 latency. It operates at the standard 1.1V voltage and uses a 288-pin unbuffered non-ECC design. The modules are built with major OEM chips from Samsung Micron or Hynix.

Suits DDR5 desktop motherboards needing 32GB

Builders upgrading a compatible desktop or workstation board will find this a straightforward drop-in. Systems requiring ECC registered memory or lower latency timings should look at different module types. The lack of a heat spreader keeps the profile low for tight spaces.

32GB total capacity handles multitasking

Two 16GB sticks leave two slots free on typical four-slot boards for future expansion. The CL42 timing and 5200 speed deliver standard DDR5 bandwidth for office productivity and gaming. Heavy content creation or virtualisation may benefit from higher capacity or tighter latency kits.

Fordele

  • 32 GB total capacity from two 16 GB modules
  • DDR5 5200 speed rated at PC5-41600 bandwidth
  • Low 1.1 V operation reduces power draw
  • CL42 latency for responsive desktop performance
  • 288-pin UDIMM fits standard DDR5 motherboard slots

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM DDR5 Orignial Series 288-Pin Non-ECC Unbuffered UDIMM Desktop PC Memory
ModelOriginal Series DDR5 Desktop PC Memory Solutions
Part NumberMD41600-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5200 (PC5 41600)
CAS LatencyCL42
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard, Desktop, Workstation, Gaming Machine Compatible
LED ColorNone

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

What motherboard slot and voltage do I need for this 288-pin 1.10 V DDR5 kit?

The kit uses 288-pin DDR5 UDIMM slots and runs at the standard DDR5 voltage of 1.10 V, so your board must support DDR5 at that voltage.

Can I add this CL42 5200 kit to slower DDR5 modules already in my system?

Yes, the modules will down-clock to match the slowest installed DDR5 speed and tighten to the loosest timings across all populated slots.

How do I confirm both 16 GB sticks are running at 5200 CL42 after install?

Check the memory tab in CPU-Z or the BIOS memory information screen; it should show 5200 MT/s, CL42 and 32 GB total capacity.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.