Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green bare circuit board DDR5 UDIMM module with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB DDR5 5600 CL46 2Rx8 1.1V UDIMM memory upgrade for Supermicro BH4SR2-25G

SKU CH-K5SQ-ZKNMC

A 32 GB DDR5 UDIMM module running at 5600 MT/s with CL46 latency and 1.1 V operation, validated for the Supermicro BH4SR2-25G motherboard

  • Capacity32GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB DDR5 module expands system capacity for demanding workloads
  • 5600 MHz DDR5 speed delivers high bandwidth for data-intensive tasks
  • CL46 latency supports responsive operation at rated frequency
  • 1 V DDR5 voltage reduces power draw versus previous generations
  • 288-pin UDIMM form factor fits Supermicro BH4SR2-25G motherboard

32 GB DDR5 5600 UDIMM for Supermicro BH4SR2-25G

This NEMIX RAM module adds 32 GB of DDR5 5600 memory to the Supermicro BH4SR2-25G motherboard. It runs at 1.1 V with CL46 latency and uses a 2Rx8 unbuffered non-ECC design. The single 288-pin stick fits directly into a compatible desktop or workstation slot.

Suits builders expanding a BH4SR2-25G system

This module is validated for the Supermicro BH4SR2-25G platform and will not suit boards that require registered or ECC memory. Buyers who need error correction, higher capacities per slot or a different pin count should look elsewhere.

Single stick with no heat spreader

The package contains one 32 GB UDIMM and no additional cables, software or cooling hardware. The bare circuit board keeps the profile low for dense chassis layouts. Installation follows the motherboard manual and requires no extra drivers.

Helstu kostir

  • 32 GB DDR5 module expands system capacity for demanding workloads
  • 5600 MHz DDR5 speed delivers high bandwidth for data-intensive tasks
  • CL46 latency supports responsive operation at rated frequency
  • 1 V DDR5 voltage reduces power draw versus previous generations
  • 288-pin UDIMM form factor fits Supermicro BH4SR2-25G motherboard

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-328K1
Capacity32GB
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (1 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM

Spurningar um þessa vöru

Does the Supermicro BH4SR2-25G motherboard need to support DDR5 5600 UDIMM memory for this module to work?

Yes, the board must accept DDR5 5600 UDIMM modules; this stick is a 288-pin 1.10 V non-ECC unbuffered DIMM rated at CL46.

Will this 32 GB DDR5 5600 module run at its rated speed if the motherboard only supports a lower DDR5 speed?

The module will down-clock to the highest speed the motherboard allows while keeping 1.10 V operation and CL46 timings at that lower rate.

How can I confirm the system recognises the full 32 GB capacity after installation?

Check the BIOS memory summary or the operating system's system information; both should report a single 32 GB DDR5 5600 module at 1.10 V.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.