SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00495018BTC
재고 있음
NEMIX RAM
NEMIX RAM 32GB DDR5 5600 CL46 2Rx8 1.1V UDIMM memory upgrade for Supermicro BH4SR2-25G
A 32 GB DDR5 UDIMM module running at 5600 MT/s with CL46 latency and 1.1 V operation, validated for the Supermicro BH4SR2-25G motherboard
- Capacity32GB
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB DDR5 module expands system capacity for demanding workloads
- 5600 MHz DDR5 speed delivers high bandwidth for data-intensive tasks
- CL46 latency supports responsive operation at rated frequency
- 1 V DDR5 voltage reduces power draw versus previous generations
- 288-pin UDIMM form factor fits Supermicro BH4SR2-25G motherboard
32 GB DDR5 5600 UDIMM for Supermicro BH4SR2-25G
This NEMIX RAM module adds 32 GB of DDR5 5600 memory to the Supermicro BH4SR2-25G motherboard. It runs at 1.1 V with CL46 latency and uses a 2Rx8 unbuffered non-ECC design. The single 288-pin stick fits directly into a compatible desktop or workstation slot.
Suits builders expanding a BH4SR2-25G system
This module is validated for the Supermicro BH4SR2-25G platform and will not suit boards that require registered or ECC memory. Buyers who need error correction, higher capacities per slot or a different pin count should look elsewhere.
Single stick with no heat spreader
The package contains one 32 GB UDIMM and no additional cables, software or cooling hardware. The bare circuit board keeps the profile low for dense chassis layouts. Installation follows the motherboard manual and requires no extra drivers.
주요 특징
- 32 GB DDR5 module expands system capacity for demanding workloads
- 5600 MHz DDR5 speed delivers high bandwidth for data-intensive tasks
- CL46 latency supports responsive operation at rated frequency
- 1 V DDR5 voltage reduces power draw versus previous generations
- 288-pin UDIMM form factor fits Supermicro BH4SR2-25G motherboard
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-328K1 |
| Capacity | 32GB |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (1 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM |
이 상품에 대한 질문
Does the Supermicro BH4SR2-25G motherboard need to support DDR5 5600 UDIMM memory for this module to work?
Yes, the board must accept DDR5 5600 UDIMM modules; this stick is a 288-pin 1.10 V non-ECC unbuffered DIMM rated at CL46.
Will this 32 GB DDR5 5600 module run at its rated speed if the motherboard only supports a lower DDR5 speed?
The module will down-clock to the highest speed the motherboard allows while keeping 1.10 V operation and CL46 timings at that lower rate.
How can I confirm the system recognises the full 32 GB capacity after installation?
Check the BIOS memory summary or the operating system's system information; both should report a single 32 GB DDR5 5600 module at 1.10 V.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
