Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Four green DDR5 RDIMM modules, no heat spreaders, 288-pin edge connectors

NEMIX RAM

NEMIX RAM 384GB (4x96GB) DDR5 5600 CL46 ECC RDIMM 2Rx4 1.1V server RAM

SKU CH-37GJ-KSY6T

Registered DDR5 server memory kit with ECC, 384 GB in four 96 GB modules at 5600 MT/s CL46 and 1.1 V

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Capacity 384GB (4 x 96GB)

  • 384GB total capacity across four 96GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency supports high-throughput data processing
  • ECC registered design detects and corrects errors to protect data integrity
  • 1V operating voltage reduces power draw in large memory configurations
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise-grade reliability

384GB DDR5 5600 ECC RDIMM Kit

This kit provides 384GB across four 96GB DDR5 5600 registered DIMMs with ECC and CL46 latency. It is built for servers and workstations that require registered, error-correcting memory at standard voltage. The modules use major OEM DRAM from Samsung, Micron or Hynix. Buyers needing unbuffered UDIMMs or non-ECC memory for consumer platforms cannot use this kit.

Registered ECC With Major OEM Chips

Registered buffering reduces electrical load on the server memory controller, while ECC detects and corrects single-bit errors for data integrity. The 2Rx4 organisation and 1.10V operation follow the DDR5 5600 JEDEC specification. No heat spreaders are included, so airflow in the chassis must be sufficient for bare modules. Systems that do not support registered ECC RDIMMs will not post with these modules installed.

DDR5 5600 PC5-44800 Interface Limits

The DDR5 5600 interface delivers a peak transfer rate of PC5-44800 and requires a 288-pin RDIMM slot with registered ECC support. Capacity per module is fixed at 96GB, so total capacity scales only by adding more identical kits within the platform's slot and rank limits. Mixed-rank or mixed-speed populations can reduce the effective data rate below 5600 MT/s. Platforms limited to lower DDR5 speeds or UDIMM-only slots cannot operate this memory at its rated specification.

Helstu kostir

  • 384GB total capacity across four 96GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency supports high-throughput data processing
  • ECC registered design detects and corrects errors to protect data integrity
  • 1V operating voltage reduces power draw in large memory configurations
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise-grade reliability

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR5 ECC Registered Server Memory Motherboard Compatible

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How often will the four 96GB DDR5 5600 CL46 ECC RDIMM modules need replacement under normal server workloads?

These registered ECC modules are built for continuous operation and carry a lifetime replacement warranty from the manufacturer, so no scheduled swap is expected unless a rare defect appears.

Which limit appears first when the 384GB kit runs at 5600 MT/s CL46 1.10V for extended periods?

The DDR5 5600 JEDEC speed rating and CL46 latency are the fixed operating ceiling; sustained loads will hit that bandwidth and timing boundary before any thermal throttle because the modules have no heat spreader.

How much noise and heat do the 288-pin 2Rx4 1.1V sticks produce when the server runs all day?

With no heat spreader and a low 1.1V operating voltage, the modules add minimal heat and zero acoustic noise; total power draw stays within the standard DDR5 5600 registered DIMM envelope.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.