Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

NEMIX RAM

NEMIX RAM 384GB (6x64GB) DDR5 5600 CL46 2Rx4 1.1V ECC RDIMM Supermicro H14SST-G memory upgrade

SKU CH-WVE2-2KCKN

Six 64 GB DDR5 5600 CL46 2Rx4 ECC RDIMMs at 1.1 V, validated for the Supermicro H14SST-G motherboard

  • Capacity384GB (6 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 384 GB total capacity from six 64 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches server memory-controller specification
  • 288-pin RDIMM form factor fits Supermicro H14SST-G slots

Server memory kit for Supermicro H14SST-G

This 384GB kit contains six 64GB DDR5 RDIMMs built to the exact rank, voltage and timing the Supermicro H14SST-G memory controller expects. Registered ECC architecture offloads the controller so every slot runs fully populated at rated speed while correcting single-bit errors on the fly. It is not for systems that require unbuffered UDIMMs or SODIMM form factors.

Sustained-load behaviour with registered ECC

Registered buffering keeps electrical loading stable across all six slots during continuous workloads, preventing the signal degradation that can appear when every channel is fully populated. ECC corrects single-bit errors in real time, stopping silent data corruption and unplanned reboots before they reach production. The modules operate at the standard 1.1V without additional cooling.

The spec that decides fitment

DDR5 5600 CL46 2Rx4 1.1V 288-pin Registered ECC is the single specification that determines whether this kit will be recognised at full capacity and run at its rated speed on the target motherboard. Matching rank, voltage, timing and registered architecture exactly is required; any deviation means the board will not populate all slots at 5600 MT/s.

Helstu kostir

  • 384 GB total capacity from six 64 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches server memory-controller specification
  • 288-pin RDIMM form factor fits Supermicro H14SST-G slots

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K6
Capacity384GB (6 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 6X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Spurningar um þessa vöru

How much power does this 384 GB DDR5 5600 kit draw at its 1.1 V rating?

Each module runs at 1.1 V, the standard DDR5 voltage, keeping power draw low even with all six slots populated on the Supermicro H14SST-G.

What motherboard slot type must I already have for these 288-pin RDIMMs to install?

The Supermicro H14SST-G needs DDR5 288-pin Registered DIMM slots; this kit matches that exact form factor and will not fit UDIMM or SODIMM sockets.

Will the 2Rx4 registered ECC design work with the memory population rules of my Supermicro H14SST-G?

Yes, the 2Rx4 registered ECC modules are spec-matched to the H14SST-G population rules so all six slots run at the rated 5600 speed.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.