SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00500262BTC
In stock
NEMIX RAM
NEMIX RAM 384GB (6x64GB) DDR5 5600 CL46 2Rx4 1.1V ECC RDIMM Supermicro H14SST-G memory upgrade
Six 64 GB DDR5 5600 CL46 2Rx4 ECC RDIMMs at 1.1 V, validated for the Supermicro H14SST-G motherboard
- Capacity384GB (6 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 384 GB total capacity from six 64 GB modules
- DDR5 5600 speed with CL46 latency for rated throughput
- Registered ECC design corrects single-bit errors on the fly
- 1 V operation matches server memory-controller specification
- 288-pin RDIMM form factor fits Supermicro H14SST-G slots
Server memory kit for Supermicro H14SST-G
This 384GB kit contains six 64GB DDR5 RDIMMs built to the exact rank, voltage and timing the Supermicro H14SST-G memory controller expects. Registered ECC architecture offloads the controller so every slot runs fully populated at rated speed while correcting single-bit errors on the fly. It is not for systems that require unbuffered UDIMMs or SODIMM form factors.
Sustained-load behaviour with registered ECC
Registered buffering keeps electrical loading stable across all six slots during continuous workloads, preventing the signal degradation that can appear when every channel is fully populated. ECC corrects single-bit errors in real time, stopping silent data corruption and unplanned reboots before they reach production. The modules operate at the standard 1.1V without additional cooling.
The spec that decides fitment
DDR5 5600 CL46 2Rx4 1.1V 288-pin Registered ECC is the single specification that determines whether this kit will be recognised at full capacity and run at its rated speed on the target motherboard. Matching rank, voltage, timing and registered architecture exactly is required; any deviation means the board will not populate all slots at 5600 MT/s.
Highlights
- 384 GB total capacity from six 64 GB modules
- DDR5 5600 speed with CL46 latency for rated throughput
- Registered ECC design corrects single-bit errors on the fly
- 1 V operation matches server memory-controller specification
- 288-pin RDIMM form factor fits Supermicro H14SST-G slots
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-924K6 |
| Capacity | 384GB (6 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 6X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
How much power does this 384 GB DDR5 5600 kit draw at its 1.1 V rating?
Each module runs at 1.1 V, the standard DDR5 voltage, keeping power draw low even with all six slots populated on the Supermicro H14SST-G.
What motherboard slot type must I already have for these 288-pin RDIMMs to install?
The Supermicro H14SST-G needs DDR5 288-pin Registered DIMM slots; this kit matches that exact form factor and will not fit UDIMM or SODIMM sockets.
Will the 2Rx4 registered ECC design work with the memory population rules of my Supermicro H14SST-G?
Yes, the 2Rx4 registered ECC modules are spec-matched to the H14SST-G population rules so all six slots run at the rated 5600 speed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
