Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green circuit board with black memory chips, 204-pin SODIMM form factor

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX PS-3615 memory upgrade

SKU CH-WYT1-H9DY1

4GB DDR3 1333 SODIMM for POSIFLEX PS-3615 terminals, 1.35V non-ECC unbuffered

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 4GB capacity boosts POS terminal responsiveness
  • DDR3 1333MHz speed handles transaction workloads smoothly
  • 35V low voltage reduces system power draw
  • 204-pin SODIMM fits POSIFLEX PS-3615 directly
  • Major OEM chips ensure reliable fanless operation

4GB DDR3 SODIMM for POSIFLEX PS-3615

This 4GB DDR3 1333 module is built for the POSIFLEX PS-3615 point-of-sale terminal. It uses a 204-pin SODIMM form factor with 2Rx8 organisation. The part is new and intended as a direct memory upgrade for that specific system.

DDR3 1333 speed and voltage limits

The module runs at DDR3 1333 (PC3-10600) with a CAS latency of CL9. It is specified at 1.35V in the title while the detailed specifications list 1.50V; the installed terminal will operate at whichever voltage its memory controller supports. No ECC or registered buffering is present.

Unbuffered non-ECC build with major-brand chips

Chips come from Samsung, Micron or Hynix depending on supply. The stick has no heat spreader, keeping the profile low for the fanless POS chassis. The 204-pin edge connector mates with the standard DDR3 SODIMM slot in the PS-3615 for tool-free installation.

Helstu kostir

  • 4GB capacity boosts POS terminal responsiveness
  • DDR3 1333MHz speed handles transaction workloads smoothly
  • 35V low voltage reduces system power draw
  • 204-pin SODIMM fits POSIFLEX PS-3615 directly
  • Major OEM chips ensure reliable fanless operation

Tæknilýsing

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Spurningar um þessa vöru

Is this the only capacity available for the PS-3615?

This module is sold as a single 4GB stick with part number MS10600-428K1. The supplier lists it as a system-specific kit for the PS-3615 terminal.

What does the 1333 MHz rating mean once installed in the PS-3615?

The module runs at DDR3 1333 with CL9 timing at 1.35 V, matching the speed and voltage the terminal's memory controller expects.

Does the 204-pin SODIMM interface limit the upgrade in any way?

The 204-pin DDR3 SODIMM form factor is fixed for this platform, so only unbuffered non-ECC DDR3 modules of this pin count will fit.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.