Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with black memory chips, 204-pin SODIMM form factor

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX PS-3615 memory upgrade

SKU CH-WYT1-H9DY1

4GB DDR3 1333 SODIMM for POSIFLEX PS-3615 terminals, 1.35V non-ECC unbuffered

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 4GB capacity boosts POS terminal responsiveness
  • DDR3 1333MHz speed handles transaction workloads smoothly
  • 35V low voltage reduces system power draw
  • 204-pin SODIMM fits POSIFLEX PS-3615 directly
  • Major OEM chips ensure reliable fanless operation

4GB DDR3 SODIMM for POSIFLEX PS-3615

This 4GB DDR3 1333 module is built for the POSIFLEX PS-3615 point-of-sale terminal. It uses a 204-pin SODIMM form factor with 2Rx8 organisation. The part is new and intended as a direct memory upgrade for that specific system.

DDR3 1333 speed and voltage limits

The module runs at DDR3 1333 (PC3-10600) with a CAS latency of CL9. It is specified at 1.35V in the title while the detailed specifications list 1.50V; the installed terminal will operate at whichever voltage its memory controller supports. No ECC or registered buffering is present.

Unbuffered non-ECC build with major-brand chips

Chips come from Samsung, Micron or Hynix depending on supply. The stick has no heat spreader, keeping the profile low for the fanless POS chassis. The 204-pin edge connector mates with the standard DDR3 SODIMM slot in the PS-3615 for tool-free installation.

Kohokohdat

  • 4GB capacity boosts POS terminal responsiveness
  • DDR3 1333MHz speed handles transaction workloads smoothly
  • 35V low voltage reduces system power draw
  • 204-pin SODIMM fits POSIFLEX PS-3615 directly
  • Major OEM chips ensure reliable fanless operation

Tekniset tiedot

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Kysymyksiä tästä tuotteesta

Is this the only capacity available for the PS-3615?

This module is sold as a single 4GB stick with part number MS10600-428K1. The supplier lists it as a system-specific kit for the PS-3615 terminal.

What does the 1333 MHz rating mean once installed in the PS-3615?

The module runs at DDR3 1333 with CL9 timing at 1.35 V, matching the speed and voltage the terminal's memory controller expects.

Does the 204-pin SODIMM interface limit the upgrade in any way?

The 204-pin DDR3 SODIMM form factor is fixed for this platform, so only unbuffered non-ECC DDR3 modules of this pin count will fit.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.